Member Since: 01 Jan 2021
Location: Dunno i was just following the satnav😳
Posts: 288
I have tapped into the aux directly at the head unit multiplug and this means you dont have to plug into the existing aux socket (blank plug) because its basically disconnected completely. Also there's no issue with volume level being low.1996 Defender -died (now in landrover heaven😇)chassis to ashes , rust to dust !
2004 Defender td5 gone
2012 Evoque gone
2007 D3 V8 HSE
8th May 2021 7:24 am
CongoBoy
Member Since: 05 Mar 2019
Location: Wiltshire
Posts: 529
gstuart wrote:
darrind wrote:
Forgot to add as its ages since I did it on my old D3 GS the wiring is still in the footwell even if your D3 doesnt have an aux connector which the low spec radio cd didnt have.
Hi
Funny u talking about adding an Aux in the base model, added one from the back of the radio by buying a plug in loom that has the Aux lead incorporated , then spent ages fitting the aux socket into my dashboard
Click image to enlarge
Yes we discussed this a couple of years ago
https://www.disco3.co.uk/forum/best-play-a...81436.html
And I hardwired mine behind the aux panel in the rear.
I was interested in doing something nearer the front to avoid the low volume issue.
I think, as suggested, a hard wire (or a splitter) from the back of the head unit multiplug.2008 D3 HSE Stornoway Grey (UK)
2008 D3 HSE Izmir Blue- South African Spec. (Zimbabwe)
2005 FFRR SC V8- Java Black
1995 D1 300 Tdi Blue - (Sourced from the UK, shipped to Namibia, driven by me to RD Congo, then Zambia, now retired in Zimbabwe)
8th May 2021 7:35 am
TBDisco3
Member Since: 18 Jan 2022
Location: ESSEX
Posts: 2
gstuart wrote:
darrind wrote:
Forgot to add as its ages since I did it on my old D3 GS the wiring is still in the footwell even if your D3 doesnt have an aux connector which the low spec radio cd didnt have.
Hi
Funny u talking about adding an Aux in the base model, added one from the back of the radio by buying a plug in loom that has the Aux lead incorporated , then spent ages fitting the aux socket into my dashboard
Click image to enlarge
Hi mate, wondering if you could point me to the correct plug in loom for the D3? Is it really just a simple plug and play with the head unit? Locating wiring in footwells etc seems a bit much for me! Thanks
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
