Member Since: 01 Nov 2013
Location: Mellieha
Posts: 67
Manual transmission. Gears not showing in cluster
2008 disco 3 manual.
As i said above. Gears not showing in cluster. I have calibrated them various times but car keeps loosing them... usually when i floor the acceleratir pedal.... any ideas please[/i]
Member Since: 06 Mar 2017
Location: Lost
Posts: 4919
Sounds like your clutch might be slipping causing loss of calibration.yµ (idµ - eAµ) ψ=mψ
17th Dec 2020 5:23 pm
Leon
Member Since: 26 Apr 2014
Location: Leamington Spa
Posts: 434
+1 For clutch slip.
17th Dec 2020 9:39 pm
rrhool
Member Since: 28 Aug 2014
Location: Norfolk
Posts: 4460
Clutch slip normally brings up other issues. Special programs off, auto park brake inactive etc.Richard
D3 SE 2007. Triumph 2.5Pi 1973. Ferguson TEA20 1948.
Discovery 2 4.0 ES 2001- Gone
Discovery 1 300Tdi ES '95 - Gone
Range Rover Classic '79 - Gone
17th Dec 2020 10:14 pm
aja4x4
Member Since: 14 Apr 2019
Location: Westbury
Posts: 2462
I would start by calibrating the XY sensor
17th Dec 2020 11:35 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 4919
lronly wrote:
usually when i floor the acceleratir pedal
He's had a go at calibration but it seems to revert to type. Even if the slippage is only slight it will loose calibration especially with hard acceleration. You can avoid this if you ease off hard acceleration and the clutch is not too badly worn. If it doesn't happen when driven with light throttle input it's a strong sign the clutch is on it's way out.yµ (idµ - eAµ) ψ=mψ
18th Dec 2020 1:48 am
john watson
Member Since: 10 Nov 2011
Location: lanark
Posts: 964
When it loses the gear position I.e. not showing on dash. When you switch off in that condition then try to fire it up. Does it start? If not does it start when you depress the clutch? If that is the case then it looks like the XY sensor on top of the gearbox is goosed.Once you have defeated the idiots any job is half done. Pity there are so many idiots to defeat.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum