notyalc
Member Since: 07 Mar 2020
Location: Northumberland
Posts: 75
|
Hi there, is putting the epb into service mode with the gap tool the same as the push pedal three times and then working the park brake switch?
If so I assume you still remove the fuse, and then replace and reset with the tool when the service work is complete?
|
20th Nov 2020 6:16 pm |
|
|
Kilovolt
Member Since: 29 Jun 2015
Location: South Derbyshire
Posts: 1061
|
In short 'yes' and 'yes' (having just completed this during lockdown).
Put it into service mode (you will hear the EPB 'back-off' further than for one or two seconds). Remove the fuse, complete the work and then re-insert the fuse and exit the service mode.
Don't forget the bedding-in procedure once you are back on the road
If you are unsure search for Bodsy's Brake Bible (it really is)
Good luck. "Track day running - Don't put your foot back on the accelerator until your absolutely sure you don't have to take it off again"
Current Ride: D4 XS Commercial Baltic Blue SDV6 fully loaded with heated everything
Track Days: BMW E36 M3 Evolution MY 1996 (3.2 Litre 377 BHP sat in 1,250 Kgs of car, with a pro safety cage and some serious braking power)
|
21st Nov 2020 10:29 am |
|
|
notyalc
Member Since: 07 Mar 2020
Location: Northumberland
Posts: 75
|
Thanks for confirming!
|
21st Nov 2020 6:59 pm |
|
|