Brake Vacuum Pump - TDV6 3.0L Di
Member Since: 08 Nov 2020
Location: High Wycombe
Posts: 3
  
|
| possible to remove the camshafts with the body on? |
|
Hi all,
Has anyone replaced the RH camshafts (and lash adjusters) in an SDV6 in-situ? I'm just wondering if the brake vacuum pump keyed into the exhaust cam can be re-installed without taking the body off?
Thanks all. Sorry if this is posted in the wrong place... I just joined the forum today 
Rich
|
 8th Nov 2020 5:53 pm |
|
|
Flack
Member Since: 06 Sep 2006
Location: Preston Lancashire
Posts: 6308
  
|
Vac pump can be changed on its own, its very tight for room but doable with body on.
Flack 
|
| 9th Nov 2020 9:10 am |
|
|
Brake Vacuum Pump - TDV6 3.0L Di
Member Since: 08 Nov 2020
Location: High Wycombe
Posts: 3
|
Thanks Flack.
I notice from the workshop manual:
• NOTE: Apply silicone gasket sealant or equivalent meeting Land Rover specification.
• NOTE: The application of sealant must be 10 mm square in two places. Install the brake vacuum pump immediately after applying the sealant.
• NOTE: The brake vacuum pump should be fitted directly to the engine without smearing the sealant.
'Without smearing the sealant' in a tight place..... 
|
| 9th Nov 2020 12:28 pm |
|
|
