Shottyman
Member Since: 13 Nov 2018
Location: Bedfordshire
Posts: 49
  
|
| do i need to flush after t/c change |
|
basically I need to change the torque converter and replace the input seal on my 6 speed auto D3, now i know that the T/C holds oil along with the cooler and the actual box.
So my question is, if i change the T/C, drain the g/box via the plug, and drain the cooler out, will this be most of the oil removed? or is there a large amount of oil stored somewhere in the gearbox that's un-accessible without a flush? i don't want to mess up a new T/C with too much old oil.
|
 2nd Nov 2020 5:48 pm |
|
|
Flack
Member Since: 06 Sep 2006
Location: Preston Lancashire
Posts: 6307
 
|
No you should be fine if changing the TC, but a flush is always a good idea.
Flack 
|
| 2nd Nov 2020 6:03 pm |
|
|
Shottyman
Member Since: 13 Nov 2018
Location: Bedfordshire
Posts: 49
|
Lovely thanks. so next week is to see if I can bench a 100kg gearbox 🤣🤣
|
| 2nd Nov 2020 7:56 pm |
|
|
