Member Since: 29 Oct 2020
Location: Dorchester
Posts: 29
Rear registration plate
Hi,
I'm brand new to this site because I'm looking for a 2005 (to avoid high road duty) Disco 3 HSE TDV6 to use as a caravan tow vehicle, but I'll also use it for more general use, including occasionally carrying materials for the house I'm renovating. I see the rear internal width will accept an 8' x 4' board, so I wondered if the rear registration plate folded down to legally allow the board to project out the open lower section of the tailgate, can anyone help?
Best regards
Alaister
29th Oct 2020 8:00 am
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73070
No, the plates are screwed or sticky-pad fixed on.
A trailer board would do what you want BUT as the open back would draw fumes into the car, it's not sensible for anything other than short infrequent trips..
Dean
====================================
2011 D4 XS - OBD port protection, RLD spare wheel protector, All LED interiors lights, Timed Climate enabled, iiD tool paired.
2011 D4 Landmark - Stolen from same dealer before I paid for it
2011 D4 GS - Stolen whilst at dealer ... All LED interiors lights, DRLs, Spare Wheel protector.
1996 300Tdi - Eaten by tin worms
A roof rack, or bars, will take your 8x4 sheets, and also fence panels 6x6, and 10' long battens, and drain pipes, and plasterboard, and . . . . . .A vaccine does not stop you catching a virus, or passing it on, or getting ill from it, really ill. It does reduce the likelyhood of you dying when really, really ill. Stay Alive - KEEP AWAY FROM PEOPLE.
29th Oct 2020 9:23 am
Gareth Site Moderator
Member Since: 07 Dec 2004
Location: Bramhall
Posts: 26770
Hardware wrote:
A trailer board would do what you want BUT as the open back would draw fumes into the car, it's not sensible for anything other than short infrequent trips.
Better tell the Top Gear boys that! They’ve been driving around with the tailgate open for years 😉
29th Oct 2020 9:27 am
Alaister
Member Since: 29 Oct 2020
Location: Dorchester
Posts: 29
Hardware wrote:
A trailer board would do what you want BUT as the open back would draw fumes into the car, it's not sensible for anything other than short infrequent trips.
Yes thanks, I'm aware of that issue and I'd be driving with the windows wide open - short distances only, but it seems I'd need to rig up an extra reg. plate anyway.
29th Oct 2020 9:40 am
Alaister
Member Since: 29 Oct 2020
Location: Dorchester
Posts: 29
Navigator wrote:
A roof rack, or bars, will take your 8x4 sheets, and also fence panels 6x6, and 10' long battens, and drain pipes, and plasterboard, and . . . . . .
Yes thanks, it's just getting those items up there - and down again - that could be a problem!
29th Oct 2020 9:42 am
Trailered Movements
Member Since: 16 Jan 2020
Location: East/West Sussex Coast Borders
Posts: 1200
As Hardware suggested, a lightboard will do the job and keep the boys in blue happy should they be having a bad day.2011 Discovery 4 Commercial SDV6 (Gone)
2010 RRS TDV8 (Gone)
1980 OBLIC 4.0ltr Range Rover (went a long time ago)
29th Oct 2020 9:49 am
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73070
Gareth wrote:
Hardware wrote:
A trailer board would do what you want BUT as the open back would draw fumes into the car, it's not sensible for anything other than short infrequent trips.
Better tell the Top Gear boys that! They’ve been driving around with the tailgate open for years 😉
Sometimes the ends justify the means. Farmer chalk look away now.
Click image to enlarge
29th Oct 2020 10:21 am
Moo D3 Decade
Member Since: 13 Aug 2010
Location: UK
Posts: 14372
Alaister wrote:
Navigator wrote:
A roof rack, or bars, will take your 8x4 sheets, and also fence panels 6x6, and 10' long battens, and drain pipes, and plasterboard, and . . . . . .
Yes thanks, it's just getting those items up there - and down again - that could be a problem!
I've been using a Hanibal expedition rack to carry large sheets of ply etc. I've never had a problem getting them on and off.
New Defender L663 110 SE (known as Noddy!)
Sold Volvo XC90 R-Design (known as Basil)
Sold - D4 HSE (Known as Gerty)
No longer the Old Buses original owner
231,000 miles and counting
05 S manual owned from March 2005
D4 Face lifted
Still original injectors and turbo
V8 Front brakes
BAS Remap, Allisport Intercooler and deCat
EGRs blanked
T-Max split charge
Hanibal Expeedition rack
Prospeed ladder
Duratrac tyres
IID BT
BAS FBH control
29th Oct 2020 10:25 am
Dimcandle
Member Since: 06 Feb 2020
Location: North Wales
Posts: 195
DSL wrote:
No, the plates are screwed or sticky-pad fixed on.
On early Range Rovers a hinged rear number plate was an option to allow them to be driven with the lower tailgate open.
My 2nd Range rover came with one, really simple idea!
Picture trawled from Google
29th Oct 2020 10:57 am
Discoveringcomfort
Member Since: 16 Sep 2015
Location: Berkshire
Posts: 637
And the original mini's I believe.
Don't film chase cars keep the bottom tailgate closed for H&S that being one reason they are used? Air suspension meaning less vibration being the other?Series 1 V8
Series 2 Hibrid V8
Discovery 3 HSE V8
29th Oct 2020 2:29 pm
Alaister
Member Since: 29 Oct 2020
Location: Dorchester
Posts: 29
Dimcandle wrote:
DSL wrote:
No, the plates are screwed or sticky-pad fixed on.
On early Range Rovers a hinged rear number plate was an option to allow them to be driven with the lower tailgate open.
My 2nd Range rover came with one, really simple idea!
Picture trawled from Google
Thanks, have you any idea if an early Range Rover hinged plate might be adapted to fit on the Disco 3?
29th Oct 2020 3:18 pm
Dimcandle
Member Since: 06 Feb 2020
Location: North Wales
Posts: 195
Can't see why not. It was simply a hinged plate that the number plate mounted to.
I think the number plate lights were on the hinged plate so folded down with it.
Might be easier to make one than to find one though!
29th Oct 2020 3:52 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73070
Or, if the top tailgate part is down in its normal position then just gaffertape a plate in the window when needed.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum