Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
  Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate · Register · Log In  
DISCO3.CO.UK > Camping, Caravanning and Holidays

Alde caravan water heater help advise please
Post Reply  Down to end
Page 1 of 2 12>
Dazz360
 


Member Since: 03 Sep 2016
Location: West Mids Walsall
Posts: 873

United Kingdom 2005 Discovery 3 TDV6 HSE Auto Bonatti GreyDiscovery 3
Alde caravan water heater help advise please

Hi guys hope you can advise

In my touring caravan I’ve got a alde comfort 2928 wet boiler, I’ve rebuilt the boiler body with stainless steel for the water jacket and burner box




On the back of the boiler is a 12 ltr water tank for hot water. A bit like a Divers bottle size With a curved heat exchanger that uses the boilers water to transfer the heat via the 2 pipes out the back of the boiler

I stripped it down also and found the heat exchanger was rusted solid in side So no water could pass through it
I made a new one but noticed that the old exchanger had a paste/compound between the water tank body and the exchanger face.

My question is does anyone know where I can get this compound from as I’m guessing it’s for transferring the heat through and I need a fair bit not just a cup full
Many thanks and sorry for the long winded explanation

This is a photo of a water tank and the old exchanger







I am due to go away on the 21st and would like to sort this out Metal auto sump & fluid change (3 hrs)
LR door puddle projectors (10 mins)
Tinted Bonnet wind deflector (10 mins)
All Intercooler pipes and Tbolts (2hrs)
3 injectors replaced so far (30mins)
Sunroof drain pipes both sides 2.5 hrs)
Rear discs, shoes,pads,callipers,flexi hoses, rigid brake line, n/s upper hub carrier bush and rear n/s upper arm (13hrs over 2 days)  
Post #216701410th Aug 2020 7:24 pm
View user's profile Send private message View poster's gallery Reply with quote
Leon
 


Member Since: 26 Apr 2014
Location: Leamington Spa
Posts: 434

England 2010 Discovery 4 3.0 TDV6 HSE Auto Zambezi SilverDiscovery 4

I use heat transfer paste also known as heatsink compound when mounting electrical components to a heatsink, I only use small toothpaste sized tubes of it, should think you might be able to get it in larger tins.

Try RS components 

Last edited by Leon on 10th Aug 2020 9:16 pm. Edited 1 time in total 
Post #216704210th Aug 2020 8:54 pm
View user's profile Send private message View poster's gallery Reply with quote
Leon
 


Member Since: 26 Apr 2014
Location: Leamington Spa
Posts: 434

England 2010 Discovery 4 3.0 TDV6 HSE Auto Zambezi SilverDiscovery 4

Also, it does spread well, a little goes a long way.  
Post #216704310th Aug 2020 8:58 pm
View user's profile Send private message View poster's gallery Reply with quote
Dazz360
 


Member Since: 03 Sep 2016
Location: West Mids Walsall
Posts: 873

United Kingdom 2005 Discovery 3 TDV6 HSE Auto Bonatti GreyDiscovery 3

Thanks Leon I’ve been looking and found this stuff
Do you think this is ok ?
https://www.screwfix.com/p/rothenberger-62...50ml/5009k Metal auto sump & fluid change (3 hrs)
LR door puddle projectors (10 mins)
Tinted Bonnet wind deflector (10 mins)
All Intercooler pipes and Tbolts (2hrs)
3 injectors replaced so far (30mins)
Sunroof drain pipes both sides 2.5 hrs)
Rear discs, shoes,pads,callipers,flexi hoses, rigid brake line, n/s upper hub carrier bush and rear n/s upper arm (13hrs over 2 days)  
Post #216713811th Aug 2020 5:15 pm
View user's profile Send private message View poster's gallery Reply with quote
Leon
 


Member Since: 26 Apr 2014
Location: Leamington Spa
Posts: 434

England 2010 Discovery 4 3.0 TDV6 HSE Auto Zambezi SilverDiscovery 4

To be honest I really can't say, have you tried contacting Alde uk?.
Would be a shame to use the wrong compound after all the effort you've gone to and get it wrong.

I'm pretty sure the latest Alde systems work the same way so must use paste.  
Post #216716411th Aug 2020 7:53 pm
View user's profile Send private message View poster's gallery Reply with quote
Leon
 


Member Since: 26 Apr 2014
Location: Leamington Spa
Posts: 434

England 2010 Discovery 4 3.0 TDV6 HSE Auto Zambezi SilverDiscovery 4

Try
Graham Cutmore engineering (wellingborough)

01933 622593
07702 057627

Have a google , apparently they supply re manufactured boilers 

Last edited by Leon on 14th Aug 2020 6:19 am. Edited 1 time in total 
Post #216717111th Aug 2020 8:19 pm
View user's profile Send private message View poster's gallery Reply with quote
Dazz360
 


Member Since: 03 Sep 2016
Location: West Mids Walsall
Posts: 873

United Kingdom 2005 Discovery 3 TDV6 HSE Auto Bonatti GreyDiscovery 3

Thanks I’ll give them a call Metal auto sump & fluid change (3 hrs)
LR door puddle projectors (10 mins)
Tinted Bonnet wind deflector (10 mins)
All Intercooler pipes and Tbolts (2hrs)
3 injectors replaced so far (30mins)
Sunroof drain pipes both sides 2.5 hrs)
Rear discs, shoes,pads,callipers,flexi hoses, rigid brake line, n/s upper hub carrier bush and rear n/s upper arm (13hrs over 2 days)  
Post #216732212th Aug 2020 10:21 pm
View user's profile Send private message View poster's gallery Reply with quote
Leon
 


Member Since: 26 Apr 2014
Location: Leamington Spa
Posts: 434

England 2010 Discovery 4 3.0 TDV6 HSE Auto Zambezi SilverDiscovery 4

Did you have any joy with them?  
Post #216771214th Aug 2020 7:19 pm
View user's profile Send private message View poster's gallery Reply with quote
sputnixb51
 


Member Since: 23 Apr 2013
Location: Morayshire
Posts: 833

Scotland 2014 Discovery 4 3.0 SDV6 SE Tech Auto Corris GreyDiscovery 4

It’s just standard heat sink paste, a tube of Regin will be enough.  
Post #216772414th Aug 2020 8:26 pm
View user's profile Send private message View poster's gallery Reply with quote
sputnixb51
 


Member Since: 23 Apr 2013
Location: Morayshire
Posts: 833

Scotland 2014 Discovery 4 3.0 SDV6 SE Tech Auto Corris GreyDiscovery 4

https://www.google.co.uk/aclk?sa=L&ai=...Qx6BAgOEAE  
Post #216772614th Aug 2020 8:28 pm
View user's profile Send private message View poster's gallery Reply with quote
Dazz360
 


Member Since: 03 Sep 2016
Location: West Mids Walsall
Posts: 873

United Kingdom 2005 Discovery 3 TDV6 HSE Auto Bonatti GreyDiscovery 3

Thanks for all the advice
I’ve got some on order 👍🏻 Metal auto sump & fluid change (3 hrs)
LR door puddle projectors (10 mins)
Tinted Bonnet wind deflector (10 mins)
All Intercooler pipes and Tbolts (2hrs)
3 injectors replaced so far (30mins)
Sunroof drain pipes both sides 2.5 hrs)
Rear discs, shoes,pads,callipers,flexi hoses, rigid brake line, n/s upper hub carrier bush and rear n/s upper arm (13hrs over 2 days)  
Post #216795116th Aug 2020 8:01 am
View user's profile Send private message View poster's gallery Reply with quote
Dazz360
 


Member Since: 03 Sep 2016
Location: West Mids Walsall
Posts: 873

United Kingdom 2005 Discovery 3 TDV6 HSE Auto Bonatti GreyDiscovery 3

Leon wrote:
Did you have any joy with them?


I started looking for heat transfer compound as I didn’t even know before what it was called 😆
Thanks for your help Leon
I’m keeping the number as it may be useful in the future Metal auto sump & fluid change (3 hrs)
LR door puddle projectors (10 mins)
Tinted Bonnet wind deflector (10 mins)
All Intercooler pipes and Tbolts (2hrs)
3 injectors replaced so far (30mins)
Sunroof drain pipes both sides 2.5 hrs)
Rear discs, shoes,pads,callipers,flexi hoses, rigid brake line, n/s upper hub carrier bush and rear n/s upper arm (13hrs over 2 days)  
Post #216795316th Aug 2020 8:04 am
View user's profile Send private message View poster's gallery Reply with quote
Leon
 


Member Since: 26 Apr 2014
Location: Leamington Spa
Posts: 434

England 2010 Discovery 4 3.0 TDV6 HSE Auto Zambezi SilverDiscovery 4

Thumbs Up Thumbs Up let us know how you get on with the re- installation.  
Post #216808316th Aug 2020 6:25 pm
View user's profile Send private message View poster's gallery Reply with quote
Dazz360
 


Member Since: 03 Sep 2016
Location: West Mids Walsall
Posts: 873

United Kingdom 2005 Discovery 3 TDV6 HSE Auto Bonatti GreyDiscovery 3

Just waiting for this compound to arrive and I can get the water tank And heat exchanger back in place, I’ve also wired up a water pump from the Webasto heater to draw the water into the heat exchanger instead of relying on the hot water rising and causing a flow
Fingers crossed 🤞
The main boiler jacket seems to be repaired now as I have had it full for over a week now and no lose of coolant Metal auto sump & fluid change (3 hrs)
LR door puddle projectors (10 mins)
Tinted Bonnet wind deflector (10 mins)
All Intercooler pipes and Tbolts (2hrs)
3 injectors replaced so far (30mins)
Sunroof drain pipes both sides 2.5 hrs)
Rear discs, shoes,pads,callipers,flexi hoses, rigid brake line, n/s upper hub carrier bush and rear n/s upper arm (13hrs over 2 days)  
Post #216809816th Aug 2020 7:12 pm
View user's profile Send private message View poster's gallery Reply with quote
Leon
 


Member Since: 26 Apr 2014
Location: Leamington Spa
Posts: 434

England 2010 Discovery 4 3.0 TDV6 HSE Auto Zambezi SilverDiscovery 4

How did you get on in the end?  
Post #217706530th Sep 2020 6:44 pm
View user's profile Send private message View poster's gallery Reply with quote
Display posts from the last:  
Post Reply Back to top
Page 1 of 2 12>
Jump to:  
< Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums
DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site