the wife
Member Since: 05 Aug 2018
Location: Spalding
Posts: 15
|
Has anyone just changed a Front lower arm rear bush or do you recommend changing the arm.
Is there anything special in changing the bottom arm or is it just unbolt - hoping they come out
|
27th Jul 2020 8:05 pm |
|
|
Biffysun
Member Since: 09 Jul 2011
Location: Central
Posts: 1788
|
Have a search on here, loads about it, most change the whole arm as you will most likely have to cut the rear bolt to get the arm off, the bolt seizes to the inner metal of the rear bush
|
27th Jul 2020 10:43 pm |
|
|
the wife
Member Since: 05 Aug 2018
Location: Spalding
Posts: 15
|
i have ordered an arm and fitting kit now.
I have also ordered 4 antiroll bar links so wish me luck
|
28th Jul 2020 8:34 pm |
|
|
the wife
Member Since: 05 Aug 2018
Location: Spalding
Posts: 15
|
All the parts are from Rimmer Brothers in Lincoln.
Cheapest i have seen for the quality
|
28th Jul 2020 8:48 pm |
|
|
lynalldiscovery
Member Since: 22 Dec 2009
Location: Maidstone
Posts: 7274
|
I bought all new bolts for mine, and the bloody old ones all came undone!
Top tip is to measure centre of bolt head to a point on the chassis, then adjust refitted bolt to the same measurement, it will still need a 4 wheel alignment, but this will keep you mobile.
|
29th Jul 2020 7:28 am |
|
|
pjm-84
Member Since: 04 Oct 2016
Location: Hampshire
Posts: 2516
|
Watching post with interest. I need to do mine shortly before the MOT in Oct. Hoping the bolts will all be removable.
The rear bushes on the front arms were replaced when I bought it back in 2016 so fingers crossed. I've already changed the struts and drop links so only the front bolts could prove stubborn
|
29th Jul 2020 7:54 am |
|
|