pgerman
Member Since: 16 Jun 2008
Location: Milton Keynes
Posts: 68
|
Changing Water Connector - LR073372 |
|
HI all,
Travelling on Friday with the caravan and the water connector decided to split on the A34. Pulled over quickly and although very hot it looks/sounds like the engine is OK
I am replacing the split part and wanted some advice. I can't seem to get the connector into the oil cooler loose. It may just be I am not being forceful enough but I'd rather check before breaking the oil cooler!!
For those of you that have done this job, please chip in with your comments!
Thanks for your help.
Paul
|
21st Jul 2020 12:32 pm |
|
|
KostasA
Member Since: 23 Aug 2015
Location: nairobi
Posts: 286
|
have you check the O rings? if i remember well the housing is on two connection to the oil cooler. these points have a grey O ring that needs to be changed also.
|
21st Jul 2020 1:31 pm |
|
|
pgerman
Member Since: 16 Jun 2008
Location: Milton Keynes
Posts: 68
|
Thanks. All done now, just needed a tug!!
The unit practically disintegrated when it came off. With a new one arriving tomorrow should be up and running in no time.
Paul
|
21st Jul 2020 5:44 pm |
|
|