dragonred
Member Since: 14 Nov 2019
Location: Torridge, North Devon
Posts: 45
  
|
| How to jack up a Disco 3/4 to change a wheel |
|
Click for hilarious youtube instruction
So I watched this guy and basically the way he did it, was exactly how I would have done it. Stick the jack under the arm and jack up. Whip out bolts, take off wheel, put new wheel on, bolts back in. Jack down, rinse repeat.
When the tyre house put my new cooper Zeon 4XS - Sports on they didn't half faff about to jack it up, told me to lock it in access height and leave a door open, and whoever said that Independent suspension is useless for off road, clearly didn't see a D4 in action.The amount of wheel travel each wheel has is astonishing even with suspension locked to access and a door open. Mike
Driving:
2016 Discovery 4 SDV6 HSE
2002 Discovery 2 Td5 ES Auto
2012 Toyota Yaris Hybrid
|
 14th Jun 2020 8:32 am |
|
|
SteveKK
Member Since: 11 Apr 2019
Location: North Herefordshire
Posts: 287
 
|
The D4 manual says put into off road height before jacking. When I recently had a puncture repaired they asked me to put it into access mode, but I insisted off road height as per the manual.
Leaving a door, or tailgate open will prevent the car adjusting height.
Regards,
Steve
|
| 14th Jun 2020 8:54 am |
|
|
RRSTDV8
Member Since: 07 Apr 2014
Location: Here
Posts: 13541
|
Isn't the instruction to put it in off road height merely to avoid having to jack the vehicle up that far on the jack. The air suspension does it quicker and more easily. As the LR jack is made of cheese and pasta, it's safer to have the vehicle do as much of the work as possible too.
My usual tyre place jacks under the suspension arms as in the video. Visiting from rrsport.co.uk
2012 RRS SDV6
2008 RRS TDV8
"When you fire that first shot, no matter how right you feel, you have no idea who's going to die! You don't know who's children are going to scream and burn. How many hearts will be broken. How many lives shattered. How much blood will spill, until everybody does what they were always going to have to do from the very beginning: SIT DOWN AND TALK!"
|
| 14th Jun 2020 9:03 am |
|
|
