Member Since: 08 Jul 2020
Location: staffs
Posts: 29
ride height sensor
so got it checked by my local LR guy on his iid tool and it came up with one fault code
body control module rear right
is this a ride height sensor ? if so do i need a genuine replacement or will after market do ?
Are these handed left/right or will they fit either side
cheers guys
have now replaced all the possible things that may go wrong 4.5 k of goodies the wife would have spent on clothes !,,,,,,!,,,,!!!
2nd Dec 2020 8:09 pm
Globetrotter448
Member Since: 21 Mar 2017
Location: Londonderry NSW
Posts: 1783
They are not interchangeable left to right so get the correct one
3rd Dec 2020 2:20 am
aja4x4
Member Since: 14 Apr 2019
Location: Westbury
Posts: 2459
I think you will find they are all different as they have different part numbers.
3rd Dec 2020 7:20 am
Goffy52
Member Since: 08 Jul 2020
Location: staffs
Posts: 29
thanks for the diagram and part numbers
cheers everyone
3rd Dec 2020 9:43 pm
Ruper
Member Since: 28 Jun 2019
Location: Virginia
Posts: 318
Lift Rods and new sensor
I bought a new (Cheap) off fleabay sensor, because I wasn't sure if it was the sensor, (turns out it was not), here's the rub, I have rhino rods and this el cheapo sensor has the arm attached very stoutly and seems to be not removable for the placenta of either the original rod or the rhino rods.
I am sure I could make it work with w Dremel, but I would go Original.
My issue turned out to be a ground issue, so I didn't need to use it. I might take to cutting it off, but not sure the rotational pin that holds the arm on is the same size as needed to fit the rods.2005 Land Rover D3, 4.4L V8, Maya Gold Metallic
1966 Scout 800, 196 cu.in.
1975 Scout II, 392 cu.in.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum