Member Since: 12 Apr 2015
Location: sunny essex
Posts: 805
amk compressor dessicant change
has anyone been successful at changing the air dryer media without removing the compressor (amk) from the car it looks fiddley but can it be done thanksplease excuse any grammer/punctuation mistakes,i'm thick,thankyou
current vehicles 2005 d3 2013 d4
5th Jan 2020 3:10 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 5036
Its a lot easier to just pull out the compressor. You do not need to remove the bracket!!
Pop out the voss lines and the elec cons, then remove the compressor vibration dampers from between the compressor and the mounting bracket . Slide the compressor forwards and out! While you have it out you can now strip the relevant components for inspection cleaning and lubrication. You can use either the Hitachi desiccant and filters or AMK, if using Hitachi you need to cut the filters down to size as the AMK has a smaller drier. Do not remove the cyl head unless you suspect a leak or can see corrosion. (white powder)
If removing the head, clean carefully the surface corrosion trying not to damage the clear protective aluminium coating. Smear a thin film of good quality silicone on the cyl head seal (Tec7) and reasemble.yµ (idµ - eAµ) ψ=mψ
5th Jan 2020 3:56 pm
eightfoot
Member Since: 12 Apr 2015
Location: sunny essex
Posts: 805
thanks another job for next weekendplease excuse any grammer/punctuation mistakes,i'm thick,thankyou
current vehicles 2005 d3 2013 d4
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum