Member Since: 06 Aug 2017
Location: Suffolk
Posts: 113
Diagnostic ODBII butchery advice.....
Hey folks, FBH is not working, wanted to get it working as it bugs me that it’s not.
Had codes:
Auxilary Heater
B1D29-93 (2E) No start, even after restart attempt - Component failure - no operation
B1D34-68 (2F) Heater in lock out mode - Algorithm based failure - event information
Cleared and tried again, much smoke, no poke
Second try normally get something like this
I have an old ODBII lead left over from BMW ownership, was wondering if I can use it to diagnose the FBH???
Wired up like this??
1st Dec 2019 12:03 pm
Martin Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18567
Member Since: 06 Aug 2017
Location: Suffolk
Posts: 113
Cheers, I have read that whole article, what I am wonder is, is the circuitry in my lead any different to those on the website. I can make up the other wires as needed.
Essentially I don’t want to spend £40 unnecessarily if I have an ODBII lead here that’s the same.
1st Dec 2019 12:38 pm
Martin Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18567
Can't really tell from the photos if it is definitely a K line type adapter (the type you need) and the web site on the label is long gone.
Looks likely though as pins 7 and 8 are bridged which suggests it supports K line.
Worth a try
Worst case if you can make the rest of the loom is a new USB adapter: https://www.disco3.co.uk/shop/usb-to-obd2-...s-p91.html06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
