GUnit73
Member Since: 09 Nov 2014
Location: North UK
Posts: 67
  
|
Is there a thread on how to remove the fog lights and best way to clear condensation and reseal?
Thanks
|
 29th Nov 2019 7:06 pm |
|
|
MikeO
Member Since: 15 Jan 2014
Location: The Cotswolds
Posts: 1391
|
Try a search for halo lights. 2016 Skoda Octavia VRS Estate
<gone>2009 FF Vogue TDV8 Buckingham Blue</gone>
<gone>2015 BMW 520D SE (not my favourite car)</gone>
<gone>2009 D3 HSE Galway Green</gone
|
| 29th Nov 2019 7:08 pm |
|
|
Sea Raider
Member Since: 01 Nov 2016
Location: None
Posts: 4450
|
| Re: Fog Light Condensation |
|
GUnit73 wrote:Is there a thread on how to remove the fog lights and best way to clear condensation and reseal?
Thanks
Yes
https://www.disco3.co.uk/forum/guide-refur...+fog+light
|
| 29th Nov 2019 7:19 pm |
|
|
GUnit73
Member Since: 09 Nov 2014
Location: North UK
Posts: 67
|
Thanks! Appreciated. Great forum...
|
| 29th Nov 2019 8:36 pm |
|
|
andy.p
Member Since: 09 Nov 2019
Location: Huntingdon
Posts: 116
|
Just fitted new fog lights from ebay! £27.00 cheap chinese  turned them on with engine running to adjust them, 5 degrees C then saw smoke filling up the O/S/F lens thought the 100w H11s were to hot for the cheap plastic but no it was my FBH exhaust getting in past the seal!!!! on the offside? so pulled them out and thought just put the outer casing on my old units but wont fit as non pattent, My lens were beyond repair so refit the seal and pop back in. This is a cautionary tail DONT but cheap chinese fog lights because they look identical but the tabs on the lens case dont line up with LR parts plus the bulb fits in upside down and had to fiddle with the loom to plug them in. 
P.S. only got the cheap ones as going to fit halo rings when they arrive and if they dont look to good I did'nt waste too much dosh.
|
| 8th Dec 2019 9:39 pm |
|
|
