Member Since: 21 Oct 2016
Location: kent
Posts: 13849
Many thks
Also didn’t realise to get the centre console storage bin out looks like I have to take the centre console apart to gain access to the centre console side panels
Because I’m thinking about if the small LEDs would look better for the middle row floor in the side of the centre console Down near the floor so hidden away
Alas I’m my own worst enemy because I overthink things all the time
Very harsh GS !!!! Andy's clearly well into Cardboard Aided Design stage and will be progressinssing to CNC modelling next (Cardboard, (k)Nife, Cut )
13th Oct 2019 9:14 am
Andy Foster
Member Since: 27 Dec 2009
Location: Liverpool
Posts: 6551
Already moved on from cardboard to some kind of plastic
Final one will be made from an aluminium composite material I think
Just need to get the fit right first.D4 MY15 SE TECH
D3 gone but never forgotten.
13th Oct 2019 10:35 am
Iceman08
Member Since: 22 Sep 2014
Location: Hereford
Posts: 2284
Click image to enlarge
Click image to enlarge
Click image to enlarge
13th Oct 2019 11:05 am
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13849
Hardware wrote:
gstuart wrote:
Nope, not looking at ur design, nope
Very harsh GS !!!! Andy's clearly well into Cardboard Aided Design stage and will be progressinssing to CNC modelling next (Cardboard, (k)Nife, Cut )
13th Oct 2019 12:32 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13849
Andy Foster wrote:
Already moved on from cardboard to some kind of plastic
Final one will be made from an aluminium composite material I think
Just need to get the fit right first.
I assumed ur be moving on from the cardboard
Was just saying , have enough winter projects lined up and can now see me doing another one , is all ur fault
13th Oct 2019 12:34 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13849
Iceman08 wrote:
Click image to enlarge
Click image to enlarge
Click image to enlarge
Wow, that makes a difference
Good to see all the different ideas
Better pull my finger out and get mine done
13th Oct 2019 12:35 pm
frenchy
Member Since: 05 Dec 2007
Location: Liverpool
Posts: 1037
Andy Foster wrote:
This is what I’ve done but they aren’t wired in yet.
…..looks familiar Andy!!!!
from memory they are a ford part (Mondeo??) but look very LR factory fit. Pop an LED lamp in them and bingo!!2000 D2 TD5 - big red tractor no longer with us
2006 D3 - no longer with us and sadly missed
2010 D4 alas no more, but a lovely colour (Nara)
2016 D4 about to depart
2022 DS nearly...........
13th Oct 2019 12:51 pm
Andy Foster
Member Since: 27 Dec 2009
Location: Liverpool
Posts: 6551
I’m off to Scotland middle of November for the Scottish Boarders Rally so want it all wired up for then
Yeah they are a Ford part D4 MY15 SE TECH
D3 gone but never forgotten.
13th Oct 2019 2:07 pm
Bungle
Member Since: 07 Apr 2015
Location: Wanborough
Posts: 256
Disco_Mikey wrote:
£4 for a pair off ebay, each with self adhesive tape
Worked well enough for a few years, then they failed
When it's back on the road, I'll find some better quality ones, and redo it
Yep, I bought a pair when you first posted about them, one was DOA and the other packed up a year or so later. Pulled them apart and both had failed as the solder joint for the wire onto the PCB had broken - so strain relief so all the load and vibration is taken by that joint. Resoldered and they are fine but have been relegated to lighting the shed where they are less disturbed. I suspect with some hot glue to re-inforce things they would probably be OK.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum