Can use a hot air gun to carefully remove them or use some dental floss
Then used a rubber wheel very carefully on slow speed, finally using some meguiars compound to finally clean the marks off
Hope that helps
24th Jul 2019 4:21 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14177
Apologises , double post
24th Jul 2019 4:22 pm
Martin59
Member Since: 12 Apr 2019
Location: KENT
Posts: 70
Cheers
Thanks mate appreciate the reply, just been out and taken the 3 off.
Cheers Martin
24th Jul 2019 4:29 pm
Martin59
Member Since: 12 Apr 2019
Location: KENT
Posts: 70
Lights
Hi have you taken the light out of the front of yours ????
24th Jul 2019 4:31 pm
CongoBoy
Member Since: 05 Mar 2019
Location: Wiltshire
Posts: 529
Mine actually came off one-time today with the heat from the British summer.
I was looking at the "3" that looked loose and the whole thing picked off.
Makes me wonder how the decals back home actaully stay on the Disco!!2008 D3 HSE Stornoway Grey (UK)
2008 D3 HSE Izmir Blue- South African Spec. (Zimbabwe)
2005 FFRR SC V8- Java Black
1995 D1 300 Tdi Blue - (Sourced from the UK, shipped to Namibia, driven by me to RD Congo, then Zambia, now retired in Zimbabwe)
24th Jul 2019 5:27 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14177
Re: Lights
Martin59 wrote:
Hi have you taken the light out of the front of yours ????
Hi
Had to remove a good few bits after fitting a new aircon condenser, as it’s been so hot I’m going to wait till it cools down abit before I start again replacing all the bits
Whilst the headlights were out, fitted some drain tubes on the back of my heads lights as I got some condensation , been sanding down the securing plates as well to take all the junk off them and allow easier movement when removing the headlights as they started to get very difficult
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
