gcb
Member Since: 03 Sep 2018
Location: surrey
Posts: 4
![](templates/vbnew/images/spacer.gif)
![2006 Discovery 3 TDV6 HSE Auto Barolo Black 2006 Discovery 3 TDV6 HSE Auto Barolo Black](../images/veh/barolo_black.gif)
|
Hello all, I have had a weird and so far unfathomable issue with the steering/ braking when cornering. It started on the right, front wheel, when I would take a left hand corner quite quick, without touching the brakes at all, it would sound like the tyre was dragging on the arch or the body, making a loud grinding noise and slowing the car down. upon investigation, there are no signs anywhere of the tyre touching at all. A friend thought it sounded and felt like the ABS was cutting in on one wheel?! It has now started doing this on both sides! so, to recap...quickly into a corner so the car leans into it, no brake! and grinding / dragging! any ideas?
I forgot to add, I have replaced the gearbox, pro shaft and drive shafts very recently, but it was doing this before I replaced them all.
|
24th Sep 2018 11:58 am |
|
|
G65W
Member Since: 22 Jan 2013
Location: United Kingdom
Posts: 44
![](templates/vbnew/images/spacer.gif)
![2005 Discovery 3 TDV6 Base 7 Seat Manual Bonatti Grey 2005 Discovery 3 TDV6 Base 7 Seat Manual Bonatti Grey](../images/veh/bonatti_grey.gif)
|
Front wheel grinding noise |
|
Hi - I am getting the same issues, did you find out what was causing it? Thanks G
|
16th May 2019 4:21 pm |
|
|
SantaCruz
Member Since: 22 Jan 2012
Location: Salisbury, Wiltshire
Posts: 564
![](templates/vbnew/images/spacer.gif)
![2016 Discovery 4 3.0 SDV6 SE Tech Auto Aruba 2016 Discovery 4 3.0 SDV6 SE Tech Auto Aruba](../images/veh/aruba.gif)
|
Check your tyre pressures, I had something similar. Si
2016 Disco 4 SE Tech
2019 Fiesta ST3
2021 GBS Zero
|
16th May 2019 4:28 pm |
|
|
L319
Member Since: 14 Dec 2013
Location: Herefordshire
Posts: 2081
![](templates/vbnew/images/spacer.gif)
![2005 Discovery 3 TDV6 HSE Auto Buckingham Blue 2005 Discovery 3 TDV6 HSE Auto Buckingham Blue](../images/veh/buckingham_blue.gif)
|
Could be DSC cutting in , will cut the throttle and brake corner of car. Check that the steering angle sensor has not come loose, bottom of steering column inside the car. Maybe worth having angle sensor calibrated.
|
16th May 2019 9:48 pm |
|
|
cosmic329
Member Since: 17 Dec 2013
Location: Chichester
Posts: 177
![](templates/vbnew/images/spacer.gif)
![2016 Discovery 4 3.0 SDV6 HSE Auto Santorini Black 2016 Discovery 4 3.0 SDV6 HSE Auto Santorini Black](../images/veh/santorini_black.gif)
|
+1 for steering angle sensor or loose ABS sensor on that wheel. Car thinks that it needs to brake that wheel for some reason. My D3 had this and was the steering angle sensor on that. Discovery 4 SDV6 HSE '65 - Projects in planning phase!
Discovery 4 SDV6 HSE '61 - gone
Discovery 3 Tdv6 HSE '56 - gone
Defender 90 Tomb Raider '51 - gone
Defender 110 XS '54 - gone
|
17th May 2019 12:11 pm |
|
|
Ratty43
Member Since: 28 Nov 2018
Location: PENZANCE
Posts: 51
![](templates/vbnew/images/spacer.gif)
![2005 Discovery 3 TDV6 HSE Auto Tonga Green 2005 Discovery 3 TDV6 HSE Auto Tonga Green](../images/veh/tonga_green.gif)
|
As above, I had this issue and it was caused by the steering angle sensor being out of calibration, on mine it didn't happen on every corner but could always be replicated on certain corners where the curve must have been just right to upset the sensors.
|
17th May 2019 3:08 pm |
|
|