Member Since: 06 Aug 2011
Location: Folkestone.
Posts: 36
Grabber 255 60 18
I'm sure this has been asked many times but the forum's advice would be appreciated.
I've had a new set of boots fitted to the Disco today, decided to go for something a bit more aggressive as I do quite a bit of country lane driving and winter can be difficult here in the far SE.
After doing my homework and reading quite a bit on here I went for th GG AT3, 255 60 18. I've just checked and adjusted the pressures to 2.3bar front and 2.4bar rear but they look a little soft.
Should the pressures be left as per the handbook or should the pressures be raised a little.
Thanks.57 Golf Gti 2.0 Turbo.
95 Honda ST1100 Pan European.
1972 Honda CB750 K2.
15th Nov 2018 5:04 pm
motom
Member Since: 15 Jun 2015
Location: Oslo
Posts: 10
I don't have any personal experience, but believe I read somewhere that increasing the pressure a little helped.
Would love to see a photo of your new wheels as I'm considering the same size and brand!
15th Nov 2018 9:10 pm
Wills105
Member Since: 06 Aug 2011
Location: Folkestone.
Posts: 36
They do look good, I'll post a photo tomorrow. Good deal to, £580, new valves, balanced and 4 wheel alignment.57 Golf Gti 2.0 Turbo.
95 Honda ST1100 Pan European.
1972 Honda CB750 K2.
15th Nov 2018 10:12 pm
Wills105
Member Since: 06 Aug 2011
Location: Folkestone.
Posts: 36
Member Since: 22 Feb 2014
Location: Scunthorpe
Posts: 584
I run mine at 35psi front and 45psi rear but i do tow a lot and carry some heavy loads a lot of the time. Have done about 30,000 miles like this and have good even wear all across all tyres.
Pete.IID, webasto software and workshop facility's available.
16th Nov 2018 12:19 pm
Wills105
Member Since: 06 Aug 2011
Location: Folkestone.
Posts: 36
Thanks Pete, I've incresed the fronts to 35psi as you suggested but only incresed the rears to 40psi, definately feels better. If I have do anything heavy I'll put a bit more in the rears.
Wills.57 Golf Gti 2.0 Turbo.
95 Honda ST1100 Pan European.
1972 Honda CB750 K2.
16th Nov 2018 5:56 pm
zinke
Member Since: 22 Feb 2014
Location: Scunthorpe
Posts: 584
I would think 40 is much better for everyday use, as I use mine for work regularly that’s why they are so hoghIID, webasto software and workshop facility's available.
16th Nov 2018 5:59 pm
Ringostarr
Member Since: 24 Jan 2016
Location: N/A
Posts: 130
Does any 1 know would the 18 inch alloy pictured above fit a D4. Even if wheel spacers could be used. Is there any MOD to make fit if nessasaryDicovery 3 (Rimini Red)
Toyota lc 150 (Black)
Toyota Hilux Crewcab (Dark Steel)
Toyota lc 120 (Silver)
14th Feb 2019 5:45 pm
Nick H
Member Since: 25 Feb 2013
Location: Southampton
Posts: 659
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
