Member Since: 13 Nov 2015
Location: Ipswich
Posts: 387
Changing height settings.
Just wondered can you use the IID to permanently change the height setting of the access height.
My wife is disabled and having the car a little lower in access height would be quite handy.
18th Nov 2018 5:59 pm
IndusD4
Member Since: 01 Dec 2011
Location: Sydney, NSW
Posts: 308
Yes you can but I'm not sure how far lower you can go. Maybe only another 20mm and then you'd be on the bump stops. I had only ever used it to go up 50mm but that does mean it is up 50mm from default in all settings (access, normal and off-road). I would think that if you lowered it that would also apply to all default settings so normal and off-road would also be lowered by the same say 20mm.
Ron2016 D4 TDV6 Corris Grey
IIDTool BT
18th Nov 2018 6:25 pm
Jamiehol
Member Since: 13 Nov 2015
Location: Ipswich
Posts: 387
Thanks, 20mm possibly won’t make a massive difference but I might give it a go as it is cheaper than a new car.
18th Nov 2018 6:58 pm
zinke
Member Since: 22 Feb 2014
Location: Scunthorpe
Posts: 584
Remember to get your tracking looked at after you change the night settings (up or down) or you will scrub your tyres pretty quick
Pete.IID, webasto software and workshop facility's available.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum