Member Since: 23 Nov 2017
Location: Stevenage
Posts: 990
Ccf resfore help
I have just restores my ccf setting from my restore but it has now all gone pair shape
With so many faults about not communicating
When I looked at the ccf it had it down as a 2008
Has this thing restored it to my last d3 and not my d4
Really need help as I don’t know what to do now
Disco 3 gone but not forGotten
Welcome disco 4
Flappy paddles working from gap
Heated steering wheel done
Bluetooth iPod connection done
Xeon lights (facelift) done
Afs retrofit done
Logic 7 retrofit done
Armrest fridge
Facelift rear lights
Retrofit High beam assist done
Genuine 22” Range Rover sport alloys
Retrofit acc (gave up not possible)
retrofit tpms done
Retrofit Range Rover lcd digital dash. Done
Retrofit blind spot assist done
2nd Oct 2018 6:00 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 72955
PM Pat@GAP, he lives for these challenges.
2nd Oct 2018 6:26 pm
James1974
Member Since: 23 Nov 2017
Location: Stevenage
Posts: 990
Yes I have mate he’s just asked for my vin
Hopefully be able to get a as built ccf file well that’s what I’m hoping
It’s def a coms error somewhere as that what all of them are am sayingDisco 3 gone but not forGotten
Welcome disco 4
Flappy paddles working from gap
Heated steering wheel done
Bluetooth iPod connection done
Xeon lights (facelift) done
Afs retrofit done
Logic 7 retrofit done
Armrest fridge
Facelift rear lights
Retrofit High beam assist done
Genuine 22” Range Rover sport alloys
Retrofit acc (gave up not possible)
retrofit tpms done
Retrofit Range Rover lcd digital dash. Done
Retrofit blind spot assist done
2nd Oct 2018 7:09 pm
James1974
Member Since: 23 Nov 2017
Location: Stevenage
Posts: 990
Well Patric and Christian are having to write me some software because for some reason it loaded a d3 ccf file to my car and not a d4 (I had a d3 before the 4 so when I changed cars it never saved the new d4 ccf instaed kept the old 3 on there ffs so now the iid tool won’t even connect to the car has can bus error 😩😩😩😩😩😩 but they have assured me all will be well but won’t be ready till tommorow god I was nearly in tears 😭😭😭😭😭😭Disco 3 gone but not forGotten
Welcome disco 4
Flappy paddles working from gap
Heated steering wheel done
Bluetooth iPod connection done
Xeon lights (facelift) done
Afs retrofit done
Logic 7 retrofit done
Armrest fridge
Facelift rear lights
Retrofit High beam assist done
Genuine 22” Range Rover sport alloys
Retrofit acc (gave up not possible)
retrofit tpms done
Retrofit Range Rover lcd digital dash. Done
Retrofit blind spot assist done
2nd Oct 2018 10:02 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
Brown trouser moment ..
Your in good hands ... they know there stuff G4 Gone ...but not forgotten
2nd Oct 2018 10:05 pm
James1974
Member Since: 23 Nov 2017
Location: Stevenage
Posts: 990
More than brown trouser moment I only restored it cause had a most fault code after I Tried to fit the later Satnav and stereo and amp which didn’t bloody work for what ever reason so after refditing the old stuff back the code appeared and wouldn’t go wasn’t affecting anything but was annoying lessen Lerner leave alone if it’s not affecting nothing
He did say it’s made it harder for them cause the digital ic I put in it
I did offer to refit my old one but they said not to worrie they sort it with the digital one in it
The car starts and drives but is very bouncy on the deck and 150 fault codes
Don’t know why the iid tool has stopped communicating as even if d3 files the can bus should still be recognised even if it’s a different speedDisco 3 gone but not forGotten
Welcome disco 4
Flappy paddles working from gap
Heated steering wheel done
Bluetooth iPod connection done
Xeon lights (facelift) done
Afs retrofit done
Logic 7 retrofit done
Armrest fridge
Facelift rear lights
Retrofit High beam assist done
Genuine 22” Range Rover sport alloys
Retrofit acc (gave up not possible)
retrofit tpms done
Retrofit Range Rover lcd digital dash. Done
Retrofit blind spot assist done
2nd Oct 2018 10:13 pm
James1974
Member Since: 23 Nov 2017
Location: Stevenage
Posts: 990
Managed to get it communicating myself in the end
How I got it communicating with the car is as follows
Ignition off plug iid tool in no can connection
Pull fuse number 5 turn ignition on no connection Turn ignition off pull tool out of obd port and reinsert
And bang starts communicating turn ignition on and job done
It will not communicate will fuse 5 in
I got lucky as waiting for gap though I would try 1 fuse at a time see if any thing happened as read about a post about fuse 16 on a disco 3
Well how lucky was it to be fuse 5 so after 5th attemp it worked and car back to normal
But u must do as the above as it still won’t communicate until it’s unpluged and re insertedDisco 3 gone but not forGotten
Welcome disco 4
Flappy paddles working from gap
Heated steering wheel done
Bluetooth iPod connection done
Xeon lights (facelift) done
Afs retrofit done
Logic 7 retrofit done
Armrest fridge
Facelift rear lights
Retrofit High beam assist done
Genuine 22” Range Rover sport alloys
Retrofit acc (gave up not possible)
retrofit tpms done
Retrofit Range Rover lcd digital dash. Done
Retrofit blind spot assist done
3rd Oct 2018 3:34 pm
davidhem
Member Since: 21 Feb 2013
Location: Kenilworth
Posts: 710
So is everything OK with your car now as far as error codes and IId communication?David
3rd Oct 2018 5:50 pm
James1974
Member Since: 23 Nov 2017
Location: Stevenage
Posts: 990
Yes mate all back to normal now and all working perfect
I have informed pat at gap of how I got it communicating again just in case for the future for anyone else
As that’s how things get solved with feedbackDisco 3 gone but not forGotten
Welcome disco 4
Flappy paddles working from gap
Heated steering wheel done
Bluetooth iPod connection done
Xeon lights (facelift) done
Afs retrofit done
Logic 7 retrofit done
Armrest fridge
Facelift rear lights
Retrofit High beam assist done
Genuine 22” Range Rover sport alloys
Retrofit acc (gave up not possible)
retrofit tpms done
Retrofit Range Rover lcd digital dash. Done
Retrofit blind spot assist done
3rd Oct 2018 7:39 pm
James1974
Member Since: 23 Nov 2017
Location: Stevenage
Posts: 990
He’s also cleared any old backups from my tool so all I have now is my own car he said my tool had 4 backups in it but didn’t let me pick the one I wanted for what ever reasonDisco 3 gone but not forGotten
Welcome disco 4
Flappy paddles working from gap
Heated steering wheel done
Bluetooth iPod connection done
Xeon lights (facelift) done
Afs retrofit done
Logic 7 retrofit done
Armrest fridge
Facelift rear lights
Retrofit High beam assist done
Genuine 22” Range Rover sport alloys
Retrofit acc (gave up not possible)
retrofit tpms done
Retrofit Range Rover lcd digital dash. Done
Retrofit blind spot assist done
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum