lrhaue
Member Since: 27 Jul 2017
Location: Rykene
Posts: 2
  
|
| Tdv6 won`t start After oilpump change. |
|
Hi!
I had the oilpump changed after it cracked and sent the beslt tensioner out of the timing gear cover.
The engine wasn`t running i was crancking it so the internal speed was minimal.
Changed the oilpump and new timing gear set up right. tried to start but wouldn`t.
Tok off the right hand side inlet manifold, rotated the engine and had my thoumb over the hole for the injector and felt there was pressure inside.
put it back togehter again and now it won`t start either.
It fires on some of the sylinders but won`t start.
Cleared all of the Faults with OBD and checked that diesel is coming to all injectors.
bleeded the diesel and can`t find air in it.
Does anybody know what could be wrong?
|
 22nd Aug 2018 6:24 am |
|
|
|
|
lrhaue
Member Since: 27 Jul 2017
Location: Rykene
Posts: 2
|
Dont remember the faults. but i had faults with exhaust gas, hvac and several in the multimedia.
i Cannot delete all faults in the multimedia or get contact with the gearbox.
what du you mean by cam wheels have spun? do you mean that the valves have broken the arm that goes to the valve?
|
| 22nd Aug 2018 7:30 am |
|
|
