Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
  Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate · Register · Log In  
DISCO3.CO.UK > Australia & New Zealand

HELP - Query re Electric Trailer Brakes
Post Reply  Down to end
Page 2 of 2 <12
smwilk
 


Member Since: 15 Oct 2006
Location: Gold Coast
Posts: 44

Australia 2006 Discovery 3 TDV6 HSE Auto Zermatt SilverDiscovery 3

Just reading here about the "LR" preferred way of wiring brake controllers with a diode. Does anyone have a diagram? I asked the dealer who was not much help other than offering to do the work.

Also, when inspecting the trailer fuses in the back of the D3, mine has had the brown wire from fuse 5 cut and joined in with the the LH brake. I assume this was done by LRA before delivery. It's a shoddy job with the join and severed wire sealed with black electrical tape. Can anyone explain this or has anyone's had this modification?

Thx TDV6 D3 HSE
Previously D2 TD5  
Post #2941761st May 2008 11:08 am
View user's profile Send private message View poster's gallery Reply with quote
dash
 


Member Since: 24 Mar 2008
Location: Perth
Posts: 12

Australia 

I'm guessing that they have cut the wire that goes to the Trailer brake pin in the Black plug.From the factory this was wired as a tailight pin(they have one for LH and one for RH).The effect in Australia was that if you didn't have a brake controller wired in and you hooked atrailer on with trailer brakes ,the brakes would be applied when you turned the lights on.Dealers have probably been told to cut it.  
Post #2941911st May 2008 12:20 pm
View user's profile Send private message View poster's gallery Reply with quote
catweasel
 


Member Since: 05 May 2006
Location: Bundaleer
Posts: 4805

or it was done by an amatuer.



much more professional ways to do things  
Post #2942141st May 2008 1:58 pm
View user's profile Send private message View poster's gallery Reply with quote
PCH
 


Member Since: 12 Jan 2005
Location: Anywhere but work
Posts: 812

Australia 2012 Discovery 4 3.0 SDV6 HSE Auto Fuji WhiteDiscovery 4

This is a post from "Sneigy" on an Australian LR forum with words describing the connections for a brake controller using the LRA recommended method.

To see the post with picture of the fuse block wiring you need to register on that forum.

http://www.aulro.com/afvb/d3-zone/51521-el...photo.html

Hope that helps.

Chris 2011 Discovery 4 (MY12) SDV6 HSE with General Grabber AT's, Traxide Aux Battery system, custom rear drawers and Autosafe half height cargo barrier

Gone - 2005 Discovery 3 TDV6 HSE
ARB Bull Bar, Warn 9.5XP Winch, IPF D/Lights, Cooper STT's, LR Raised Air Intake, Traxide aux battery system, custom drawers and half height Autosafe cargo barrier, Mitchell Bros 4x4 tow hitch  
Post #2944972nd May 2008 12:19 am
View user's profile Send private message View poster's gallery Reply with quote
smwilk
 


Member Since: 15 Oct 2006
Location: Gold Coast
Posts: 44

Australia 2006 Discovery 3 TDV6 HSE Auto Zermatt SilverDiscovery 3

Thx Chris, solved all my queries. Cheers TDV6 D3 HSE
Previously D2 TD5  
Post #2951963rd May 2008 11:49 pm
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 2 of 2 <12
Jump to:  
< Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums
DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site