Member Since: 03 Nov 2009
Location: Greater Venice
Posts: 2025
May be the Engine ECU cooling fan is faulty or, when remapped, not electrically re-connected?Discovery 5 tdv6 HSE Corris Gray Outback Engineering Limited Edition IID Pro MV License
26th Mar 2018 8:29 am
Jubbly
Member Since: 20 Nov 2016
Location: Stourbridge
Posts: 401
Ok I’ll check, I assumed it was radiator fans not ecu!
Hope it’s just not connected and that it’s been so cold no lasting issues.Jaguar I-Pace HSE imminent.
Gone HSE with Flappy Paddles. IID BT tool. RLD Spare Protector, Altox GPS.
26th Mar 2018 8:39 am
dgardel
Member Since: 03 Nov 2009
Location: Greater Venice
Posts: 2025
Click image to enlarge
item 8C636 - FAN EEC MODULE [ (V)AA000001 - ]
From the workshop manual: P115F-13 Cooling fan circuit electronic control module - Circuit interrupted
DESCRIPTION OF THE FAULT:
NOTE: Circuit reference EFC.
- The command module engine has detected a open circuit through the lack of tension polarization, the bass current flow, the absence of variation of the status of an input in response to an output
- Circuits wiring fault fan of cooling module engine control
- Fan failure of cooling down
CORRECTIVE ACTIONS:
- Consult the wiring diagrams and verify the presence of an open circuit in the circuit of the cooling fan of the engine control module.
- Repair the wiring as need.
- Using the system diagnostic approved by the manufacturer, delete all DTCs stored using the card of the "Diagnosis menu" and repeat the test
- Check and install a new one cooling fan if necessaryDiscovery 5 tdv6 HSE Corris Gray Outback Engineering Limited Edition IID Pro MV License
26th Mar 2018 9:10 am
Jubbly
Member Since: 20 Nov 2016
Location: Stourbridge
Posts: 401
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
