Just a quick thought,
does anybody know how secure the Landrover security wheel nuts are? Are they easy to remove (not to much info please)? The unlocking tool has a letter on it - does this mean that there are only 26 variables? How easy it is to buy a full set A-Z?
Am having problems sleeping at night.....
7th Dec 2007 5:04 pm
Wex
Member Since: 16 Apr 2007
Location: Knackeragua
Posts: 5173
Dont worry the unlocking tool will break when they try to use it
My friend bought his D3 back in December 2006, I bought mine in July 2007, and we have the same wheel nut key pattern...
Atleast I know where to go when I lose mine, I suppose....The surest sign that intelligent life exists elsewhere in the universe is that none of it has tried to contact us yet.
7th Dec 2007 5:18 pm
ronp
Member Since: 29 Nov 2006
Location: North Yorkshire
Posts: 15263
Even if they've got your locking wheel nut key, they've still got to jack it up to remove.
As already discussed [in depth] on this site, jacking up a D3 is not the easiest and safest thing to do without a proper jack and knowledge of the D3's suspension settings.
Is it really worth the hassle when they can nick the wheels off an X5 much easier?...... always on the road less travelled 🚧
7th Dec 2007 5:41 pm
captain_sugar
Member Since: 05 Sep 2006
Location: Hradec Kralove
Posts: 1095
Good point Ronp, I guess a not d3-experienced thief will be suprised about the car's articulation and will find his jack too small for the job...
7th Dec 2007 5:53 pm
gilmore
Member Since: 16 Jan 2005
Location: On the sofa
Posts: 2185
I've taken by locking studs off. They're unreliable.
I reckon any thief who manages to lift 2.7 tonnes of D3 on my drive with three large dogs biting his ass deserves the soddin' wheels.
regs
robAll opinions expressed in this posting are my own and are not necessarily those of someone who knows what they are talking about.
Land Rover Defender V8, 50th Anniversary Edition
Mercedes ML350CDI
HM Moto CRE300X
Honda CRF250X
1974 Honda CB750K4
1975 Honda CB750K5
Ford Transit Custom (for the bikes)
7th Dec 2007 6:02 pm
simon
Member Since: 11 Jan 2005
Location: Shropshire
Posts: 18296
captain_sugar wrote:
... and will find his jack too small for the job...
I think most scrots have a problem in that dept... an inadequacy that leads them into a life of crime and social unruliness
7th Dec 2007 6:09 pm
al cope
Member Since: 08 Nov 2005
Location: Oldbury, WM
Posts: 10352
why bother when they can get the spare much easier.
AlVolvo XC90 B5 Plus Dark
Gone - MY18 D5 HSE - Corris on 22's with Black Pack
Now gone - MY16 D4 SE Tech, Loire Blue, Almond Leather, Privacy, plus some other goodies.
Old - MY12 D4 SDV6 XS Auto - Ipanema Sand with Almond Leather - Plus other niceties, and D4.com sticker
Older - D3 TDV6 XS Auto - Lugano Teal with Almond Leather, 20" Stormers, Shiny Tailpipes, DVD/TV - and obligatory D3 sticker
Ancient - D3 TDV6 S - Tonga with Ebony, 20" Stormers, satnav & DVD
already sorted the spare wheel using some plywood thanks to this forum
Kev
7th Dec 2007 7:13 pm
DaveT
Member Since: 01 Aug 2005
Location: Cornwall
Posts: 2576
This is quite a good deterrent...
Quite cheap too.Long succession of Disco's since 2001...
SIII Lightweight - neglected & rusting. Bulkhead, A panels, vent panel & outriggers now disintegrated - Next years project!
7th Dec 2007 10:40 pm
Stephen
Member Since: 26 Mar 2007
Location: London SW
Posts: 117
Spare wheel theft
Kev,
I'm interested in what you say about protecting the spare wheel against theft with plywood and have searched in the forum for it but cannot find a reference.
Can you very kindly give a reference to the article which describes it?
My co supplies the LR factory (via there sub supplier) with locking nut in batches of the same type, so you get a few days build of vehicles all with the same locking nuts, and yes there are only a couple of dozen permutations
The D3 lockers are much better than the D2, and I believe achieve a high anti theft rating. (Both made by ATP in Northampton)
The Paddy Hopkirk - McGard design as used by Ford and many others to me are a better design, and just as anti theft.
"I know that you believe that you understood what you think I said, but I am not sure you realize that what you read is not what I meant"
10th Dec 2007 9:54 pm
alltnaha
Member Since: 21 Feb 2007
Location: London
Posts: 249
I had locking nuts. Then had a puncture Easter weekend in Dublin. The removal tool stripped the nut .Tried 3 LR dealers , no go, so I made it back to Anglesey on two puncture squirt cans , very slowly.
There I was told up to 7 day wait for main dealer to sort.
Then a very helpful man at a tyre fitter changed the tyre in situ - result - full speed back to London.
The LR dealers all told me they had seen the same stripping before . I had the nuts changed to ordinary ones and will never have them again. Also where I had my STs fitted they told me those nuts were always a problem - and when was the last time you saw any car up on bricks ?- everyone has alloys now.
John
12th Dec 2007 3:00 pm
Wex
Member Since: 16 Apr 2007
Location: Knackeragua
Posts: 5173
Quote:
I had locking nuts. Then had a puncture Easter weekend in Dublin. The removal tool stripped the nut .Tried 3 LR dealers , no go, so I made it back to Anglesey on two puncture squirt cans , very slowly.
John , plenty of D3 members this side , would've helped you out .
12th Dec 2007 3:18 pm
WillMyth
Member Since: 11 Jul 2007
Location: Tuam
Posts: 400
Re: Spare wheel theft
Stephen wrote:
Kev,
I'm interested in what you say about protecting the spare wheel against theft with plywood and have searched in the forum for it but cannot find a reference.
Can you very kindly give a reference to the article which describes it?
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
