Member Since: 27 Dec 2009
Location: Liverpool
Posts: 6551
Not got round to finishing it yet. Looks like I could be working through this lockdown so don’t know when I’ll get a chance to sort it.D4 MY15 SE TECH
D3 gone but never forgotten.
3rd Nov 2020 7:54 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 14177
Hi andy
Hope ur keeping safe and well mate
Loving the drawers , work of art and looks extremely well built , bet that took some designing including sourcing the materials and must admit never seen those outside rails etc before , or is it like a kit please
look forward seeing the finished article
Many thks
3rd Nov 2020 7:59 pm
Andy Foster
Member Since: 27 Dec 2009
Location: Liverpool
Posts: 6551
Fridge slide almost done. Just waiting on a few bits that hopefully will turn up today.
The frame of the platform that the fridge will sit on is made just need to cut the sheet material and attach it all.
Will put a top on as well so I can put stuff on top, will add tie down points to stop whatever I put on top falling off.
D4 MY15 SE TECH
D3 gone but never forgotten.
28th Nov 2020 12:27 pm
Andy Foster
Member Since: 27 Dec 2009
Location: Liverpool
Posts: 6551
Clean, paint and fix it down and good to go.
D4 MY15 SE TECH
D3 gone but never forgotten.
6th Dec 2020 10:21 am
Andy Foster
Member Since: 27 Dec 2009
Location: Liverpool
Posts: 6551
Bit more progress on the fridge slide and drawer system. Slow going but getting there.
Will fit a tie down point to each corner of the top of both so I can stack things on top when on the move and have it all secure. Ordered the cladding so that should turn up this week ready for fitting at the weekend. Going to use Dibond so hopefully will be up to the job.
Had a test fit in the back of the D4 today and must admit pretty happy with it so far.
D4 MY15 SE TECH
D3 gone but never forgotten.
7th Mar 2021 7:06 pm
Gareth Site Moderator
Member Since: 07 Dec 2004
Location: Bramhall
Posts: 26779
Looking a good job there Andrew. 👍
7th Mar 2021 9:45 pm
Ceekay
Member Since: 17 May 2009
Location: Bury
Posts: 2089
Very Professional looking Andy D4 HSE Lux MY16 Club Waitomo
D3 HSE MY06 missing her still…
8th Mar 2021 10:33 am
James W
Member Since: 27 Mar 2008
Location: Riyadh, KSA
Posts: 3079
Great job Andy D4 XS, gone, much loved, never forgotten
2018 FFRR SDV8 Autobiography - Gone to someone with less sense and more time to enjoy it
2016 Toyota Hilux Invincible - Liberating experience
2011 D4 XS - OBD port protection, RLD spare wheel protector, All LED interiors lights, Timed Climate enabled, iiD tool paired.
2011 D4 Landmark - Stolen from same dealer before I paid for it
2011 D4 GS - Stolen whilst at dealer ... All LED interiors lights, DRLs, Spare Wheel protector.
1996 300Tdi - Eaten by tin worms
8th Mar 2021 12:38 pm
Andy Foster
Member Since: 27 Dec 2009
Location: Liverpool
Posts: 6551
Thanks all
The cladding turned up so have started cutting and fitting. No photos yet but will get some soon.
Cheers AndyD4 MY15 SE TECH
D3 gone but never forgotten.
9th Mar 2021 3:22 pm
Andy Foster
Member Since: 27 Dec 2009
Location: Liverpool
Posts: 6551
Bit more done to the fridge slide today. Top on and tie down points installed. Not sure whether to cover it with something though. I’ve got some carpet left over from the last one I made so might use that or some rubber matting.
Click image to enlarge
Click image to enlarge
D4 MY15 SE TECH
D3 gone but never forgotten.
20th Mar 2021 2:02 pm
danamags
Member Since: 12 Mar 2021
Location: Raleigh
Posts: 9
Andy Foster wrote:
Finally got my switches connected up and must say I’m rather pleased with them.
This is the night time shot. They look very bright but in real life they are just right I think. Plus I’ll not forget I’ve got the turned on.
This is a brilliant use of that little space! I've been eyeing it thinking, there's gotta be something to do here. Bravo!
14th Apr 2021 3:28 pm
Andy Foster
Member Since: 27 Dec 2009
Location: Liverpool
Posts: 6551
Cheers pal. It’s a great little panel plus a great company to deal with. This configuration wasn’t one of their options but a couple of conversations and they made what I wanted D4 MY15 SE TECH
D3 gone but never forgotten.
Not sure whether to cover it with something though. I’ve got some carpet left over from the last one I made so might use that or some rubber matting.
Have a look at the BBQ patio protection mat at Costco. Looks tough and nonslip but not silly money..
Dean
====================================
2011 D4 XS - OBD port protection, RLD spare wheel protector, All LED interiors lights, Timed Climate enabled, iiD tool paired.
2011 D4 Landmark - Stolen from same dealer before I paid for it
2011 D4 GS - Stolen whilst at dealer ... All LED interiors lights, DRLs, Spare Wheel protector.
1996 300Tdi - Eaten by tin worms
14th Apr 2021 9:47 pm
Andy Foster
Member Since: 27 Dec 2009
Location: Liverpool
Posts: 6551
Cheers Hardware will have a look next time I’m in there D4 MY15 SE TECH
D3 gone but never forgotten.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
... All LED interiors lights, DRLs, Spare Wheel protector.
