Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
DISCO3.CO.UK > Faults & Fixes (D4)

Wife’s approved used D4 restricted performance
Post Reply  Down to end
Page 1 of 1
Splitpin
 


Member Since: 30 Dec 2010
Location: At the toolbox
Posts: 535

Wife’s approved used D4 restricted performance

So we bought the wife’s D4 just before Christmas and it’s been parked up till her old car went back.

So on her first trip today 120 miles and the engine management light came on and it’s stuck with restricted performance 🤣

It’s a 2013 SDV6 8 speed auto with 66k on the clock...

Any bets to what it will be?

Landrover assist are 6-7 hours away 🤣
  
Post #191637319th Feb 2018 12:29 pm
View user's profile Send private message View poster's gallery Reply with quote
kevin-t
 


Member Since: 12 Nov 2007
Location: sheffield
Posts: 682

United Kingdom 2005 Discovery 3 TDV6 HSE Auto Tonga GreenDiscovery 3

Any bets to what it will be?


EXPENSIVE
  
Post #191637719th Feb 2018 12:41 pm
View user's profile Send private message View poster's gallery Reply with quote
adam
 


Member Since: 20 Sep 2005
Location: Home and Happy
Posts: 6917

United Kingdom 

Or maybe not - could be just a MAF sensor or loose pipe connection in the air intake pipework

Good luck anyway and report back on what the problem was as useful info for other folk (me included) Thumbs Up
  
Post #191638219th Feb 2018 12:53 pm
View user's profile Send private message View poster's gallery Reply with quote
Gareth
Site Moderator 


Member Since: 07 Dec 2004
Location: Bramhall
Posts: 26775

United Kingdom 

Or at the other end of the spectrum, cracked manifold maybe?

Get the error codes read.
  
Post #191638419th Feb 2018 12:56 pm
View user's profile Send private message View poster's gallery Reply with quote
Splitpin
 


Member Since: 30 Dec 2010
Location: At the toolbox
Posts: 535


I’m sure we will find out when they turn up!
  
Post #191639019th Feb 2018 1:12 pm
View user's profile Send private message View poster's gallery Reply with quote
nigel207
 


Member Since: 26 Mar 2009
Location: Nottinghamshire
Posts: 1359

England 2016 Discovery 4 3.0 SDV6 Landmark LE Auto ZanzibarDiscovery 4

If it’s ‘approved’, it should be a free fix!
  
Post #191640319th Feb 2018 2:17 pm
View user's profile Send private message View poster's gallery Reply with quote
Browny90
 


Member Since: 19 Jul 2016
Location: Ashbourne
Posts: 698

United Kingdom 2016 Discovery 4 3.0 SDV6 Landmark LE Auto Santorini BlackDiscovery 4

You have 2 years warranty, call LR Assist and get them to send someone out..

Tip.. If you want a courtesy car, then do call LR Assist - They have to supply a vehicle..

If you just drive it in then they don't..

LR Assist actually sort out car hire, but with the dealer you have to hope that they have a car sitting waiting..

My D4 is in for a new compressor and Exhaust Valve (which is on Back Order Rolling Eyes ) on the used approved warranty.

So I have an Evouqe in it's place until my car is done, I think some dealers limit to 7 days also..

Good Luck!
 Disco4 MY16 SDV6 Landmark Black
Disco4 MY12 SDV6 XS Orkney Grey (Gone)
Defender 90 200tdi Completely rebuilt. 
 
Post #191640719th Feb 2018 2:27 pm
View user's profile Send private message View poster's gallery Reply with quote
Splitpin
 


Member Since: 30 Dec 2010
Location: At the toolbox
Posts: 535


Still waiting, thanks for the info.

We will see what they say when the plug in.
  
Post #191641119th Feb 2018 2:42 pm
View user's profile Send private message View poster's gallery Reply with quote
Splitpin
 


Member Since: 30 Dec 2010
Location: At the toolbox
Posts: 535


So it turned out to be the first airflow sensor....

LR assist have run out of them on their van so have headed off to the local dealer to collect one.

Good service so far TBH
  
Post #191648519th Feb 2018 6:00 pm
View user's profile Send private message View poster's gallery Reply with quote
Allansky63
 


Member Since: 16 May 2018
Location: Helensburgh
Posts: 2

Scotland 2012 Discovery 4 3.0 SDV6 Landmark LE Auto Zermatt SilverDiscovery 4

I recently bought a 2012 Discovery 4 Landmark
Runs really well but on 3 occasions. the red warning triangle appeared and went into reduced power mode. Each time was after hard acceleration on a fairly steep hill. Still managed to get up to 70mph. Each time switching off and waiting for a little while, anywhere from 10 to 30 minutes. On restarting everything ok.
Any ideas?
  
Post #194570316th May 2018 3:28 pm
View user's profile Send private message View poster's gallery Reply with quote
alfamale
 


Member Since: 25 Jul 2011
Location: Stroud, Gloucestershire
Posts: 2185

United Kingdom 2011 Discovery 4 3.0 SDV6 XS Auto Zermatt SilverDiscovery 4

Allansky63, you've made a good start by reading one thread, but there are so many with forum goers with cars behaving similarly to this.

Try searching cracked inlet manifold, MAF sensor, etc. Lots of hints and tips.

Mine was down to a cracked inlet manifold, with the N/S going first at 90k and the O/S at about 112k.

Oh, and welcome! Thumbs Up
 Front Runner Rack, OEM Ladder & RAI, Tuff-Trek Foxwing, B'rakhah Ingonyama Expedition Trailer, RLD's Spare Wheel Protector, Bodsy's Bars, Empty Pockets! Member of Gloucestershire & Worcestershire 4x4 Response.

 
 
Post #194570816th May 2018 3:42 pm
View user's profile Send private message View poster's gallery Reply with quote
qwerty
 


Member Since: 11 Nov 2010
Location: Bristol
Posts: 119

United Kingdom 2012 Discovery 4 3.0 SDV6 GS Auto Santorini BlackDiscovery 4

Could be the TSOV (turbo shut off valve) that is located behind the small plastic cover behind the front of the drivers wheel. If you look inside there is a rod that seizes that operates this actuator for flow to the 2nd turbo which cuts in above 2500-2700.

Normally just needs freeing with WD then a grease to preserve. There was a modified design but think your age should have this already?
  
Post #194571116th May 2018 3:43 pm
View user's profile Send private message View poster's gallery Reply with quote
Allansky63
 


Member Since: 16 May 2018
Location: Helensburgh
Posts: 2

Scotland 2012 Discovery 4 3.0 SDV6 Landmark LE Auto Zermatt SilverDiscovery 4

thanks for the tip, will have a look and check this. Only happened those 3 times.
  
Post #194571516th May 2018 3:58 pm
View user's profile Send private message View poster's gallery Reply with quote
Disco_Mikey
 


Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20841

Scotland 2005 Discovery 3 TDV6 HSE Auto Cairns BlueDiscovery 3

I've seen a few cars now where the vacuum pipes go soggy with oil, lose tension/grip of the pipe, and fall off

Also causes TSOV related issues
 My D3 Build Thread

TDV8 Retrofit Build Thread 
 
Post #194573616th May 2018 5:36 pm
View user's profile Send private message View poster's gallery Send e-mail Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site