Member Since: 22 Dec 2009
Location: Maidstone
Posts: 7274
Look at spares prices before considering anything with a K series engine.
The proper kit for the head gasket also includes new head bolts as they pass right through the head and block and screw into the main bearing caps.
200tdi now getting thin on the ground, but without a shadow of a doubt one of the best old school engines out there, I have two so may be biased!
Member Since: 12 Oct 2012
Location: Hampshire
Posts: 327
Few years ago now, but I spent a couple of days at the LR Training School at Gaydon, doing an abbreviated version of the 200tdi / 300tdi / LT77 / R380 familiarisation courses. We stripped and rebuilt one of each over the course of two days. At that time, LR had long since stopped doing mechanics courses on such ancient machines, and the instructor had to trawl a few local scrapyards to find us a 200tdi to work on
Very sad, very anorak way to spend a couple of days off work - we all had a great time
(It was all organised by a friend for the Camel Trophy Owners Club, and a few of us lesser mortals tagged along.)
2nd Feb 2018 5:44 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10573
It's worth learning on something modern 16v
2nd Feb 2018 7:21 pm
Gareth Site Moderator
Member Since: 07 Dec 2004
Location: Bramhall
Posts: 26753
A Series Land Rover 2.25 petrol is a joy to work on. I rebuilt mine, and it was very satisfying when it ran 1st turn of the key.
If your going to start reboring cylinders, or regrinding cranks, it’s going to be mildly expensive on any engine.
The rebuild of the 2.25 (also the 200/300tdi) ,you need nothing more than a decent set of spanner’s, sockets screw drivers a lump hammer and a torque wrench.
If you want to borrow my engine stand, let me know.
2nd Feb 2018 8:00 pm
WW88
Member Since: 19 Aug 2017
Location: Northants
Posts: 250
Subaru EJ20 engines are good to work on, very straight forward in my opinion.
2nd Feb 2018 8:24 pm
dadof7kids
Member Since: 23 Aug 2011
Location: sunny Doncaster
Posts: 1303
i fancy something a bit harder..
2nd Feb 2018 11:30 pm
galwaygreen
Member Since: 30 Oct 2011
Location: plymouth
Posts: 6525
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum