Member Since: 27 May 2016
Location: Essex
Posts: 26
Removing rear outer parking sensor
Hi guys,
Heed to replace my drivers side rear outer sensor can this be done without removing the bumper, if so how?
Thanks
21st Jan 2018 10:15 pm
zinke
Member Since: 22 Feb 2014
Location: Scunthorpe
Posts: 584
Yes, just lay on your back and you will feel the Sensor, much easier to do if you know how they are held in by having previous experiences but easy enough with a good torch.
Pete.IID, webasto software and workshop facility's available.
23rd Jan 2018 9:45 pm
sweetpea54321
Member Since: 23 Nov 2015
Location: Bolton
Posts: 220
Re: Removing rear outer parking sensor
Zetecslad wrote:
Hi guys,
Heed to replace my drivers side rear outer sensor can this be done without removing the bumper, if so how?
Thanks
Did mine a few weeks ago without removing bumper.
As already said.... if you are quite agile you will see the back of the sensor with a torch. It simply unclips and you will need to push the sensor inwards to release. I sprayed mine with loads of wd40 and gave it a whack to drive it inwards so I could remove.
You should be able to feel the sensor with your fingers enough to work out how the clip releases
Hope this helps
Mike oMods so far:
New wheel winch
Instrument upgrade (clock on dash)
D4 fascia + Garmin nuvi
LED side light, interior etc
New FL2 rear wheel arch seals
Parrot MKi9200 hands free kit
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum