DISCO3.CO.UK - View topic - FBH attempt no joy

Advertise on DISCO3.CO.UK

Forum · Gallery · Wiki · Shop · Sponsors

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate · Log In

DISCO3.CO.UK > Webasto Fuel Burning Heater

FBH attempt no joy

Page 1 of 1

DrewLR4

Member Since: 17 Jan 2018
Location: South Devon
Posts: 173

2010 Discovery 4 3.0 TDV6 XS Auto Galway Green

FBH attempt no joy

Hi

Just had my timed climate activated by my local land rover specialist and now i have the additional button on the touch screen. Have set the timer several times and nothing happens! Fuel tank full, good battery and outside temp well down in single figures.
Been back to the garage and its the first one they have done so left it with them to double check and they have confirmed with additional sources as well as the people who provide their kit for amending the software that all is correct.
FBH runs when starting the engine when cold so guessing no issue there.

With ignition off and turning on radio so that screen activates the normally greyed out buttons for manual vents and manual heat are useable and when i hit the vents they come on but the heat button does not turn on the FBH.

Anyone able to offer any advice on what i may have missed or further tests?

I fitted the module and areal in boot myself and have a remote which also does nothing but im guessing with it not working from the screen the radio module would also have no functionality.
The garage knew the radio module was fitted and also enabled the blipper.

Cheers
Drew

17th Jan 2018 2:40 pm

Jubbly

Member Since: 20 Nov 2016
Location: Stourbridge
Posts: 401

What lights are on the remote when you press it? Jaguar I-Pace HSE imminent.
Gone HSE with Flappy Paddles. IID BT tool. RLD Spare Protector, Altox GPS.

17th Jan 2018 7:18 pm

DrewLR4

Member Since: 17 Jan 2018
Location: South Devon
Posts: 173

Lights on remote doing what they are ment to do. Hold the on button down for 2 seconds and you get a green light for 2 seconds then a steady constant green blink letting you know its on. Except nothing I do will trigger the FBH to turn on.
As it was not configured from the factory is there a need to add any fuses to the fuse box? although I'm guessing if the timer option is on the screen that the answer is probably no.

18th Jan 2018 9:39 am

Flack

Member Since: 06 Sep 2006
Location: Preston Lancashire
Posts: 6313

2007 Discovery 3 TDV6 XS Auto Stornoway Grey

Even if the timer option is on the screen it does mean that they have enabled all the options that need to be done, its a while since I did one but I think there are at least 3 or 4 options that need to be enabled to get it to work fully. Also on a couple I have done it needed to be done twice then it worked.

Flack

18th Jan 2018 9:58 am

Gazellio

Member Since: 08 Jan 2011
Location: Chilterns
Posts: 4130

2009 Discovery 4 TDV6 SE Auto Indus Silver

^ as above plus I know its obvious but after the set up I assume it not locked out with a simply code clearing needed. Easily missed.

18th Jan 2018 10:14 am

DrewLR4

Member Since: 17 Jan 2018
Location: South Devon
Posts: 173

Now that I don't know, could you give me a bit more info on what the indie would need to check?

Also can anyone recommend an indie that has actually done this before with proven results as it may be worth my trying someone else. With work I travel most of Devon and the Devon end of Cornwall?

Cheers

18th Jan 2018 11:31 am

Gazellio

Member Since: 08 Jan 2011
Location: Chilterns
Posts: 4130

Any basic OBD11 code reader can clear the fault if its listed. Could be a simple solution not looked at.

18th Jan 2018 12:01 pm

Page 1 of 1

Jump to:

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

Quote Reply

DISCO3.CO.UK is independent and not affiliated to Land Rover.