Member Since: 08 Jan 2011
Location: Chilterns
Posts: 4130
Pretty sure it will go the centre plate route next time (and look like a D Sport rear end) but its a shame because with different rear lights and a bit of thought it could remain, like the D1/2/3/4, unique and even get a split tailgate...
23rd Nov 2017 12:00 pm
Gazellio
Member Since: 08 Jan 2011
Location: Chilterns
Posts: 4130
OK last drawing and I think we are getting somewhere, split tailgate is back!
23rd Nov 2017 12:20 pm
Gazellio
Member Since: 08 Jan 2011
Location: Chilterns
Posts: 4130
BOOM:
23rd Nov 2017 12:25 pm
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20856
Member Since: 08 Jan 2011
Location: Chilterns
Posts: 4130
Well that's just it the proportions ARE the D5 its a sketch taken/traced from an actual photograph so they could do something similar with thin side mounted lights and split tailgate.
23rd Nov 2017 12:44 pm
Bello35
Member Since: 14 Mar 2017
Location: Bretagne.
Posts: 161
Last drawing is cool.
Yep, the vertical rear lights cluster definately balance the fat/high back. The twin exhausts on the right counter balance also the left offset plate...and of course, the beloved split tail gate is back!
Well done.
23rd Nov 2017 12:53 pm
Red Merle
Member Since: 30 Aug 2014
Location: Liskeard
Posts: 7441
Interesting sketches and some of them are a big improvement.
The problem is that to create a useful lower tailgate with a remotely low loading height, the back of the car needs to be much flater, or there is no straight edge to form a hinge (not unless you make a very thick rear lower door and then mount it impractically high).
I wish anyone who wants to try luck in changing McGovern’s mind on this one; he is after all a “trained designer”, while customers simply “aren’t qualified” to comment 2011 - 2015: 3 x FL2
2015 - 2017: 2 x D4
2017 to date: FFRR SDV8
2023 to date: 2 x FL2 as “second” cars 🙄
2021 to date: Hinckley built ‘14 Triumph Trophy 1200
2022 to date: Hinckley built ‘14 Triumph Trophy 1200 & sidecar!
(One of only two known to exist in the world!)
you could make part of the bumper move with the lower tailgate section ?
would that reduce thickness or height issue of the tailgate bit ?
23rd Nov 2017 1:27 pm
Gazellio
Member Since: 08 Jan 2011
Location: Chilterns
Posts: 4130
To be honest the redesign even if a single tailgate would be an improvement and at least "Look Right" but I am sure the LR engineers could make a workable split tailgate if they tried hard enough.
23rd Nov 2017 1:44 pm
Red Merle
Member Since: 30 Aug 2014
Location: Liskeard
Posts: 7441
Hardware17 wrote:
you could make part of the bumper move with the lower tailgate section ?
would that reduce thickness or height issue of the tailgate bit ?
Yes, that would help. Probably complex to do though...2011 - 2015: 3 x FL2
2015 - 2017: 2 x D4
2017 to date: FFRR SDV8
2023 to date: 2 x FL2 as “second” cars 🙄
2021 to date: Hinckley built ‘14 Triumph Trophy 1200
2022 to date: Hinckley built ‘14 Triumph Trophy 1200 & sidecar!
(One of only two known to exist in the world!)
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
