Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
DISCO3.CO.UK > In Car Electronics (D3)

TomTom mount question
Post Reply  Down to end
Page 1 of 2 12>
DSL
Keeper of the wheelie bin 


Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73132

Ukraine 
TomTom mount question

I'm going to mount the PC cradle for my TomTom 720 in the centre cubby tray (where the posh D3s have their LR satnav) as an alternative to windscreen mounting "Suzie". I have the TMC adapter which connects into the base of the tomtom so will drill a hole through the base & feed the cable up from underneath, no issues there. What I don't then have is any way of charging the tomtom as the cable attached (fixed) to the stand is a USB cable. Anyone know if there is any gadget that I can plug into the 12 socket that I can then plug this USB plug into to provide power to the TomTom???

I'd take some pics but there is no juice in the camera and I can't find the charger! Big Cry Big Cry
   
Post #22951730th Nov 2007 11:48 am
View user's profile Send private message View poster's gallery Reply with quote
B16 KJR
 


Member Since: 10 Jul 2006
Location: Rosyth, Fife
Posts: 3005

Scotland 

you can plug the 12v charger into the side of the home dock. I did this for a while and then removed the USB cable. I looked really neat in there BUT after a little while I "lost" the spoken instuctions, if you went into demo mode it would speak to me, but once you set an address into it and started to drive the unit stopped giving spoken instructions. No one could explain why this happened, not even Tomtom and in the end I used the windscreen mount upside down stuck to a piece of perspex in the bottom of the cubby tray, since then no proplems.
  
Post #22951930th Nov 2007 11:56 am
View user's profile Send private message View poster's gallery Reply with quote
PaulP
 


Member Since: 04 May 2007
Location: Barcelona
Posts: 4317

Spain 2006 Discovery 3 TDV6 SE Auto Buckingham BlueDiscovery 3

A bit on the pricey side (almost two whole pounds!!), but here you go: Whistle Whistle

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?Vie...0184918669
 2006 Discovery 3 TDV6 SE Auto Buckingham Blue
2007 Golf GT DSG 
 
Post #22952130th Nov 2007 12:03 pm
View user's profile Send private message View poster's gallery Reply with quote
Wex
 


Member Since: 16 Apr 2007
Location: Knackeragua
Posts: 5173

Ireland 2006 Discovery 3 TDV6 S Manual Bonatti GreyDiscovery 3

Useless bit of info ; Tom Tom & Blackberry's use the same power jack , saved be buying an in car car charger for my Blackberry.
  
Post #22952230th Nov 2007 12:15 pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
DSL
Keeper of the wheelie bin 


Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73132

Ukraine 

Unfortunately the car charger is no good as the "small usb" type plug that fits into the tomtom is in the base of the stand.



crap pic, looking for better



Above shows how the unit would sit in the desk stand, unfortunately that means that you can not plug in a power cable to it as the socket for that is underneath the tomtom (plug part of the stand).
   
Post #22952430th Nov 2007 12:23 pm
View user's profile Send private message View poster's gallery Reply with quote
DSL
Keeper of the wheelie bin 


Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73132

Ukraine 

Ah, ignore my rantings, just found what I'm after:



http://www.datakits.co.uk/store/usb-car-ch...-1925.html
   
Post #22952730th Nov 2007 12:33 pm
View user's profile Send private message View poster's gallery Reply with quote
captain_sugar
 


Member Since: 05 Sep 2006
Location: Hradec Kralove
Posts: 1095

Czech Republic 2014 Discovery 4 3.0 SDV6 HSE Auto Scotia GreyDiscovery 4

Have you looked at the brodit mounts?
www.brodit.se
they fit on the side of the central console.
I have their mount + holder for phone on the driver's side of the console and their mount + holder for tomtom on the passenger side.
In such a way you do not need to sacrifice a handy box for everything possible. And power supply is very easy to hide coming from the foot space.
GPS signal is good although the tomtom doesn't realy look at the sky.
  
Post #22953330th Nov 2007 12:58 pm
View user's profile Send private message View poster's gallery Reply with quote
DSL
Keeper of the wheelie bin 


Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73132

Ukraine 

They are similar to one of the other mounts available (forgotten their name s) however the cradle that came with the unit is ideal for mounting in the sat nav cubby box, does not get in the way & can be seen by driver & passanger. Will get a 12V to USB converter sorted, Amplins have them so will try local branch.
   
Post #22953730th Nov 2007 1:05 pm
View user's profile Send private message View poster's gallery Reply with quote
SN
 


Member Since: 03 Jan 2006
Location: Romiley
Posts: 13710


Derek - is your TT similar size to the One XL - I'm looking to get one to swap and change between mine and SWMBO's motor and thinking about mounts and spaces
 Steve N | 21MY Defender | 08MY Discovery 3 (history) | 06MY Discovery 3 (ancient history)   
Post #22953830th Nov 2007 1:12 pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
CFB
 


Member Since: 02 Dec 2005
Location: Bradford, West Yorkshire
Posts: 6100

United Kingdom 

DSL, I used a dash disc from ebay to stick the windscreen mount in the cubby, works a treat and you can run the normal charger wires etc down inside. Just trim the rubber mat around and it looks tidy.





 2020 BMW X1 18d XDrive X-Line Auto  
Post #22953930th Nov 2007 1:14 pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
discoagogo
 


Member Since: 30 Aug 2007
Location: Hampshire
Posts: 209

United Kingdom 2007 Discovery 3 TDV6 XS Auto Zambezi SilverDiscovery 3

I did the same as CFB and I am very pleased (didn't run any cables though *lease company Whistle *)

I also decided to cut all of the back of the matt off rather than the circle - has the added benefit of providing a lip to hold things in place that you slip in there when not used the tomtom

The angle offered by the PC dock was not as good or adjustable for different angles etc the mounting disks you can get off ebay are a great idea imho
 2007 TDV6 XS Silver
Running with some <a>BioDiesel</a>
<a>4x4 Prejudice</a> 
 
Post #22954430th Nov 2007 1:43 pm
View user's profile Send private message View poster's gallery Reply with quote
DSL
Keeper of the wheelie bin 


Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73132

Ukraine 

cfb, the mounts have changed, see below. They do not let U stick it to the dash as the cables go into the tomtom from below and foul the floor of the cubby box. Whilst I'll use the suction mount for SWMBO's car (occasional use), the cubby slot is the best place but with the desk stand.

Agreed the angle of the desk stand is not adjustable but when I put the stand in there & put the tomtom on teh stand it was pretty much as I'd have placed it anyway. I'll mess around with positions before I fix it to the floor of the slot.



PS at last a decent pic of the desk stand:

  

Last edited by DSL on 30th Nov 2007 1:54 pm. Edited 1 time in total 
Post #22954830th Nov 2007 1:51 pm
View user's profile Send private message View poster's gallery Reply with quote
B16 KJR
 


Member Since: 10 Jul 2006
Location: Rosyth, Fife
Posts: 3005

Scotland 

DSL, your home dock is different from the one on my Tomtom 710, did not realise they had changed.
  
Post #22955030th Nov 2007 1:54 pm
View user's profile Send private message View poster's gallery Reply with quote
CFB
 


Member Since: 02 Dec 2005
Location: Bradford, West Yorkshire
Posts: 6100

United Kingdom 

Me neither, sorry.

Looks like you have a plan though Thumbs Up
 2020 BMW X1 18d XDrive X-Line Auto  
Post #22955430th Nov 2007 1:59 pm
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
DSL
Keeper of the wheelie bin 


Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73132

Ukraine 

Also the screen mount has changed which does not make it very easy to dash mount, esp as the cables go into the base of the unit:

   
Post #22955530th Nov 2007 2:00 pm
View user's profile Send private message View poster's gallery Reply with quote
Display posts from the last:  
Post Reply Back to top
Page 1 of 2 12>
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site