- You are currently viewing DISCO3.CO.UK as a guest - Register to take part or Log In
green750one
Member Since: 05 Apr 2015
Location: Epsom
Posts: 49
|
I had to remove the right hand side trim panel in the load space on my MY10 LR4 to fit the control box for remote FBH. Any smart ideas for refitting as it's obviously not designed to be removed.
Thanks http://www.disco3.co.uk/gallery/albums/use...100x28.gif
|
20th Aug 2017 2:22 pm |
|
|
spikekellyrm
Member Since: 23 Jul 2015
Location: Manchester
Posts: 662
|
Aggression. D4.5 Facelift, Lazer ST4, Prospeed underbody and rack, IID BT, Compomotive/BFG KO2, Series MFlaps, RAI, Dog Gd+XBB, Alive Tuned, T-Max/YellowTop, RemoteFBH, GlassesMod, WheelWinchMod, Jack Mod, LED Mods, Seized Crank Mod....
|
20th Aug 2017 2:25 pm |
|
|
|
Russell
Member Since: 24 Aug 2007
Location: Kent
Posts: 10564
|
Pictures might help as if it is the one that cover the wheel arch it comes out and goes in easily MY17 D5 1st Edition Namib Orange
MY15 D4 HSE Kaikoura Stone
MY12 D4 HSE Nara Bronze Sold and gone
MY11 D4 HSE Stornaway Grey Sold and gone
D3 S spec Silver Sold and gone
Tow bar, full length roof bars, side steps, tow bar storage unit, surround camers.
D4 camera club
|
20th Aug 2017 3:33 pm |
|
|
|
MrH
Member Since: 08 Aug 2007
Location: lost in the forest
Posts: 7754
|
You pull the whole plastic unit off the interior, the bit you highlighted is part of it and doesn't come away on its own. LRs are a fond memory, apart from the maintenance.
|
20th Aug 2017 8:44 pm |
|
|
TigerRecovery
Member Since: 31 May 2017
Location: Long Stratton, Norwich, Norfolk
Posts: 901
|
That might explain the issue.
Could you take the whole side off and glue the centre piece back in place from behind? That way it wouldn't look out of place. 1972 Range Rover Classic 2 door V8
2013 Land Rover Discovery 4 HSE - SCRAPPED
2016 Land Rover Discovery 4 Landmark
2022 Volvo XC40 T5 PHEV 282HP FWD 3 cylinder!
|
20th Aug 2017 8:55 pm |
|
|
Hardware
Member Since: 28 Jun 2016
Location: Hiding under the M60
Posts: 12709
|
Someone posted on same issue a few weeks ago... Some handy pictures were included. .
Dean
====================================
2011 D4 XS - OBD port protection, RLD spare wheel protector, All LED interiors lights, Timed Climate enabled, iiD tool paired.
2011 D4 Landmark - Stolen from same dealer before I paid for it
2011 D4 GS - Stolen whilst at dealer ... All LED interiors lights, DRLs, Spare Wheel protector.
1996 300Tdi - Eaten by tin worms
|
20th Aug 2017 8:59 pm |
|
|
|
Hardware
Member Since: 28 Jun 2016
Location: Hiding under the M60
Posts: 12709
|
Only on my phone so limited access to forum.
The issue was that previous owner had pushed the blanking plate next to bottle holder inwards and then followed it with a load of rubbish. .
Dean
====================================
2011 D4 XS - OBD port protection, RLD spare wheel protector, All LED interiors lights, Timed Climate enabled, iiD tool paired.
2011 D4 Landmark - Stolen from same dealer before I paid for it
2011 D4 GS - Stolen whilst at dealer ... All LED interiors lights, DRLs, Spare Wheel protector.
1996 300Tdi - Eaten by tin worms
|
20th Aug 2017 9:13 pm |
|
|
swansty
Member Since: 21 Sep 2008
Location: Northern Ireland
Posts: 918
|
green750one wrote:Ok I did a quick search but didn't see anything obvious. Will have another look.
As Mr H said...the bit you have pulled off and taped back in place should not come off on its own. The whole of that plastic panel that it is part of is what comes off.
|
21st Aug 2017 8:21 am |
|
|
Hardware
Member Since: 28 Jun 2016
Location: Hiding under the M60
Posts: 12709
|
Just spent an hour searching for the thread with the useful pictures... Whilst SWMBO nipped into the bank "for 5 minutes" ... Failed to find it. .
Dean
====================================
2011 D4 XS - OBD port protection, RLD spare wheel protector, All LED interiors lights, Timed Climate enabled, iiD tool paired.
2011 D4 Landmark - Stolen from same dealer before I paid for it
2011 D4 GS - Stolen whilst at dealer ... All LED interiors lights, DRLs, Spare Wheel protector.
1996 300Tdi - Eaten by tin worms
|
21st Aug 2017 9:35 am |
|
|
green750one
Member Since: 05 Apr 2015
Location: Epsom
Posts: 49
|
swansty wrote:As Mr H said...the bit you have pulled off and taped back in place should not come off on its own. The whole of that plastic panel that it is part of is what comes off.
B*gger! http://www.disco3.co.uk/gallery/albums/use...100x28.gif
|
21st Aug 2017 12:06 pm |
|
|
Hardware
Member Since: 28 Jun 2016
Location: Hiding under the M60
Posts: 12709
|
Tbh ... When I saw the pictures which I cant track down, it looked like it could be reassembled then whole thing put back in place.
Anyone else remember that post? I reckon about 4 weeks ago. .
Dean
====================================
2011 D4 XS - OBD port protection, RLD spare wheel protector, All LED interiors lights, Timed Climate enabled, iiD tool paired.
2011 D4 Landmark - Stolen from same dealer before I paid for it
2011 D4 GS - Stolen whilst at dealer ... All LED interiors lights, DRLs, Spare Wheel protector.
1996 300Tdi - Eaten by tin worms
|
21st Aug 2017 1:00 pm |
|
|
|
|
Posting Rules
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|
|
DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|