Member Since: 18 Dec 2011
Location: Windsor
Posts: 262
SatNav issue on D3
Hi all,
A few weeks ago my satnav told me that there was an error reading the disc........i took it out and cleaned and no joy, read all stories of needing to replace the unit under the seat or even changing the system for a D4 type......
the disc was an updated non LR one so i thought i would try the original LR disc, this then worked and has done ever since however when selecting a new destination you can pick a POI or a previous but you cant enter a postcode [only digits appear - no letters] i have ordered a new disc but wondered if the symptoms mean there is something else wrong?
Thanks in advance.
21st Aug 2017 9:05 am
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 72798
Is your default country U.K. or still set/reset to factory default Belgium?
21st Aug 2017 9:08 am
kevinreeves
Member Since: 18 Dec 2011
Location: Windsor
Posts: 262
Hi
Thats a good point, when i originally placed the non LR updated disc in i did the set up, when i placed the original disc back in i never changed any settings as i thought it would be as previous.......i take it i need to do this then? plus do i need to change the disc with vehicle running or not [i changed it with ignition off?]
Thanks
21st Aug 2017 9:13 am
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 72798
I've changed default country on the move when crossing from one country to another, I think it's in settings somewhere. You don't have to change the disk at all.
21st Aug 2017 9:19 am
kevinreeves
Member Since: 18 Dec 2011
Location: Windsor
Posts: 262
Hi again, just checked and its set as UK, what else could this mean?
cheers
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum