Member Since: 05 May 2017
Location: Manchester
Posts: 33
Clunking when turning
Just a question, i had my window down while reversing on full lock left hand down then put into first and set off in full right lock i get a clunk, also while being in wales on some tight switch backs going down hill i get the clunk too any ideas ?
17th Aug 2017 2:35 pm
conman69
Member Since: 11 Aug 2012
Location: Norfolk
Posts: 431
I've had the same for approx 12 months now, no one seems to know what the cause is
Noticed mine going around roundabouts to start with and then sometimes on full lock reversing.
Passed MOT recently so can't be too serious
Yours could be totally different though and maybe just the stops that requires greasing?Discovery3 TDV6 GS
Disco3.co.uk front orange +white tailgate stickers
Belts, pulleys, oil pump replaced, double tow-bar electrics
Land Rover rubber mats throughout, tinted windows, wind deflectors, smoked side repeaters, retro fitted Garmin, smooth leather steering wheel, cruise control + radio switches, 19" HSE wheels, Bearmech side-tubes, BAS IFBH module, roofbars.
LML Star Deluxe
18th Aug 2017 1:24 pm
IOM man
Member Since: 03 Nov 2013
Location: Peel
Posts: 303
I have a low clunk when reversing with full left hand lock, mine has done it for approx 12 -18 months
It's been serviced 3 times and on the first service they said it needed a bottom ball joint which I thought would cure it but it didn't and it's had a clean bill of health on the following services
I have now fitted both bottom ball joints and a NSF drive shaft and still clunking
There is no play in any other suspension component or the top ball joints so I might do the OSF front drive shaft in the next 6 months, but I will live with it for now
Following this thread to see what other people suggest Current:
2010 Discovery 4 HSE TDV6
2020 Audi Q2 TSFI 40 Aline Quattro Black Edition
2006 Audi RS4 4.2 V8 - Toy in the garage
Gone but not forgotten:
2006 Range Rover Sport HSE TDV6
2018 Lexus NX 300 F Sport Hybrid
2005 Discovery 3 HSE TDV6
2015 Discovery HSE Lux
200 Discovery TDI
300 Discovery TDI
Land Rover 90 2.5 Diesel
Series III SWB Land Rover 2.25 diesel
TD4 Freelander Kalahari
1.8 petrol Freelander
18th Aug 2017 4:53 pm
UtilityGuy
Member Since: 26 Mar 2016
Location: Northampton
Posts: 343
Ive seen this on a few D3's now, it just seems to be the whole system moving about a bit under load, remember your moving a 2.5 ton monster and every part is doing its best to keep you in the air, all at the same time, some things can be like spring loaded and when they get a chance to flex back under load, they will,
that's the way i was told my LR main dealer master tech,
21st Aug 2017 10:40 am
MikeO
Member Since: 15 Jan 2014
Location: The Cotswolds
Posts: 1390
Just a thought - have you checked the steering end stops are well greased?2016 Skoda Octavia VRS Estate
<gone>2009 FF Vogue TDV8 Buckingham Blue</gone>
<gone>2015 BMW 520D SE (not my favourite car)</gone>
<gone>2009 D3 HSE Galway Green</gone
21st Aug 2017 11:16 am
bimblephish
Member Since: 21 Jul 2016
Location: Wiltshire
Posts: 272
Might also be the transfer box locking up. Have you checked your tyre pressures lately? Have you had the alignment done (or done anything to hit the alignment out?). Transfer box calibration might be in order, might not be that but if you happen to have an IID or similar it could be a quick fix
22nd Aug 2017 9:08 am
rrhool
Member Since: 28 Aug 2014
Location: Norfolk
Posts: 4520
Mines been doing it for a while, it is slowly getting more noticeable. I've put it down to the inner track rod ends or the steering rack.
Must get under and have a look!Richard
D3 SE 2007. Triumph 2.5Pi 1973. Ferguson TEA20 1948.
Discovery 2 4.0 ES 2001- Gone
Discovery 1 300Tdi ES '95 - Gone
Range Rover Classic '79 - Gone
22nd Aug 2017 9:13 am
Discologist
Member Since: 19 May 2014
Location: Yorkshire
Posts: 541
I've noticed mine doing something like this s couple f times recently. Since I had the inner track rod ends flagged as an advisory so I might start here.
Then I just need to work out what the new intermittent 'squeak' is.
I have thison my D3, I replaced teh trackrod end that was on my advisory and it seemed to go away , but really it didnt and is still doing it , full lock (RH down) and reverse from park.
For a laugh i asked Kwik fit and they got themselves quite annoyed today trying to locate it. they will have a nother look on the MOT station ramps next week.
Doesnt seem fatal as the rattled the whole car!!
8th Jul 2021 3:30 pm
nigethecat
Member Since: 11 Sep 2016
Location: Marnoch
Posts: 4244
Had a clunking on full lock when I bought my D4, took it to local indie who greased up the stops and no more clunking...I want to see the sweets before I get into your windowless van... I'm not stupid!
Corris Grey D4 Commercial SE 2016
Zermatt Sliver 2007 D3 SE manual (gone)
Indus Silver D4 HSE 2015 (gone)
Bonatti Grey D3 HSE 2006 (gone)
White D3 S (LHD) 2007 (gone)
Firenze Red D4 HSE 2014 (gone)
Black RRS 3.6TDV8 2008 (gone)
Rusty Green Defender 110 1997 (gone)
Black FL2 HSE 2013 (gone)
Member Since: 14 Apr 2019
Location: Westbury
Posts: 2463
The front wishbone has a part the sticks out and contacts with a v shaped casting in the back if the hub carrier to stop the wheels turning to far and damaging the driveshafts.Andrew
D3 2.7tdv6 2005
D4 3.0 SDV6 Commercial died and gone to LR heaven
D5 3.0 SDV6 HSE
9th Jul 2021 5:30 am
MikeO
Member Since: 15 Jan 2014
Location: The Cotswolds
Posts: 1390
Yep, see my post above. Exactly what happened on mine. Was making an annoying clunk on full lock. Bit of grease and was good as gold.2016 Skoda Octavia VRS Estate
<gone>2009 FF Vogue TDV8 Buckingham Blue</gone>
<gone>2015 BMW 520D SE (not my favourite car)</gone>
<gone>2009 D3 HSE Galway Green</gone
9th Jul 2021 7:34 am
aja4x4
Member Since: 14 Apr 2019
Location: Westbury
Posts: 2463
Did it do it only when you turned the steering one way or either way?Andrew
D3 2.7tdv6 2005
D4 3.0 SDV6 Commercial died and gone to LR heaven
D5 3.0 SDV6 HSE
9th Jul 2021 11:50 am
cpeacock6
Member Since: 09 Oct 2016
Location: Scotland
Posts: 19
When I had new lower arms put on, it made an awful grinding clunk on full lock in either direction. Right enough, found very little info about those little nodules that need some grease and all of a sudden it was gone.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
