z4cAtS
Member Since: 05 May 2011
Location: M4 J13
Posts: 137
  
|
| Large ball join splitter needed. |
|
Hello, does anyone have a ball joint splitter I could borrow please?
Needs to fit 39mm+ diameter on the taper and 40mm jaw opening.
I am doing my front lowers and my splitter doesn't quite fit.
Am near Newbury.
Many thanks (Remap, EGRs Blanked,Silicon I/C hose) from BAS, (Torque Convertor, Compressor, FL Wishbones, Alternator) by WD, Belts by Newbury4x4, Megaflush+extra cooler by GRGB, Diff+Transfer oils, ARB Bushes, Fuel filter, Fixed Towbar, Remote FBH.
The 'z' is silent
|
 3rd Jun 2017 8:36 am |
|
|
Flack
Member Since: 06 Sep 2006
Location: Preston Lancashire
Posts: 6274
 
|
You dont need a splitter use a good dead blow hammer and they will drop out.
Flack 
|
| 3rd Jun 2017 9:10 am |
|
|
dlw
Member Since: 03 Dec 2014
Location: Wellingborough
Posts: 374
|
I had a normal splitter and hit it that hard it opened to the shape, ended up using a blow torch to warm it up then it sort of fell out with a few whacks 
|
| 3rd Jun 2017 10:06 am |
|
|
geoff.
Member Since: 24 Jan 2010
Location: West kent
Posts: 8531
|
it will split with a decent hammer blow
|
| 3rd Jun 2017 4:33 pm |
|
|
z4cAtS
Member Since: 05 May 2011
Location: M4 J13
Posts: 137
|
Sorted now thanks, me and Mr A.Grinder came up with a solution. (Remap, EGRs Blanked,Silicon I/C hose) from BAS, (Torque Convertor, Compressor, FL Wishbones, Alternator) by WD, Belts by Newbury4x4, Megaflush+extra cooler by GRGB, Diff+Transfer oils, ARB Bushes, Fuel filter, Fixed Towbar, Remote FBH.
The 'z' is silent
|
| 3rd Jun 2017 6:45 pm |
|
|
blue meanie
D3 Decade
Member Since: 04 Aug 2005
Location: Newbury
Posts: 6861
|
Should have given me a shout, I have the correctly specified 'LR special tool' for this job
 and theeeeennn......???
|
| 3rd Jun 2017 11:13 pm |
|
|
