Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
DISCO3.CO.UK > Technical (D3)

Suspension fault - dealer recommended work = confused!
Post Reply  Down to end
Page 1 of 1
Solitaire
 


Member Since: 12 Mar 2014
Location: Sittingbourne
Posts: 4

United Kingdom 2006 Discovery 3 TDV6 SE Manual Unknown ColourDiscovery 3
Suspension fault - dealer recommended work = confused!

Hi All,

Feeling confused by information provided by main dealer!! Looking for some constructive advice please.

My 2006 Disco 3 had been showing a message - Suspension fault, normal height only' together with the related amber warning light. This message/warning light only came on after a couple of minutes of driving. When first started the vehicle would move to access height until the light came on.

I booked vehicle into main dealer but due to the waiting time the dealer suggested I call out my breakdown service in case it was something they could fix. (?) For once in my life I did as I was told but has back fired big time.

The breakdown company arrived with a low loader and when asked if they would like to look at the vehicle I was told, quote "I'm not a mechanic, I'm a lorry driver. I've come to pick it up"! Vehicle was loaded and taken to my normal main dealer.

Yesterday I was presented with a video health check of my vehicle together with a written list of work required. List follows...

i) Requires suspension compressor;
ii) n/s/r airbag damaged;
iii) recommend n/s/r level sensor and wiring;

along with other items that do not relate to suspension and are not in red.

My hesitation in agreeing the work is that to my knowledge the vehicle has not been connected to a diagnostic machine and the technician in the video would suggest that it's the level sensor and wiring that is causing the problem not all three things. During a verbal conversation with them I was told doing all three things would clear the warning... Confused!! Confused

Are they just being overcautious by replacing all of the above or is this normal?

Apologies as I know there has been much talk on this subject in the past!!

Thanks
  
Post #18213641st Jun 2017 1:06 pm
View user's profile Send private message View poster's gallery Reply with quote
thommo1927
 


Member Since: 30 Sep 2016
Location: Cardiff South Wales
Posts: 415

Wales 2005 Discovery 3 TDV6 HSE Auto Bonatti GreyDiscovery 3

I wouldn't have nothing done until it's been plugged in.
  
Post #18213861st Jun 2017 1:58 pm
View user's profile Send private message View poster's gallery Reply with quote
Oiley
 


Member Since: 17 Jan 2015
Location: Kent
Posts: 213

United Kingdom 2005 Discovery 3 TDV6 S Manual Cairns BlueDiscovery 3

@ solitarie try and contact Geoff on the forums he a top bloke and mechanic, before go with the dealer.

that's my advice.
  
Post #18215801st Jun 2017 9:36 pm
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site