Member Since: 22 Jun 2011
Location: West Midlands
Posts: 1155
IID Bt tool
Plug in & read for faults got this one listed below & wont clear but no lights on dash any ideas ?
29th Apr 2017 8:12 pm
Mog60
Member Since: 27 May 2015
Location: Perth
Posts: 18
I can't be of much help but I have the exact same fault code as you on my 2014 HSE LR4. Like you the fault can't be cleared and I see that the quoted milage updates to the present milage for each read of the fault codes. I also asked about this issue on the forum and didn't get a response but the fault has not given any actual issues and my main dealer is not worried about it either, so I just live with it. I remember a quote which I think comes from GAP that "A discovery without a fault code doesn't exist". This may be true or not but I think it is meant to put things in perspective and prevent too much worry I think.
9th May 2017 9:45 am
dgardel
Member Since: 03 Nov 2009
Location: Greater Venice
Posts: 2025
From the workshop Manual:
U201B-54 Control Module Calibration Data #2 - Missing calibration
Configure the module using the manufacturers approved diagnostic system by running the relevant
Configuration and Set up application for calibrating the Steering ColumnDiscovery 5 tdv6 HSE Corris Gray Outback Engineering Limited Edition
IID Pro MV License
9th May 2017 10:04 am
stephenw46
Member Since: 22 Jun 2011
Location: West Midlands
Posts: 1155
My fault as now cleared I updated the software on the id11 tool & plugged in went through the process of putting back to original configurations and this time it cleared and stayed away
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum