Member Since: 22 Sep 2014
Location: Hereford
Posts: 2284
Raised Air Intake Group Buy
I have spoken with Mantec today about trying to get a discount on their genuine LR raised air intakes for a group buy and they referred me to Flatdog who they say have stock of their RAI's.
Flatdog are selling them on their website for £240. The lowest they told me they would sell them for is £222 delivered for a minimum order of five.
This price isn't as low as I hoped for but it's a saving. I may try my luck again tomorrow with Mantec to see if they can do anything at all!
So, as it stands is anyone interested?
Last edited by Iceman08 on 24th Apr 2017 2:48 pm. Edited 2 times in total
19th Apr 2017 9:47 pm
Martin Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18558
Sign up added (you needed to have posted in "Group Buys" forum to enable the signup options )06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
19th Apr 2017 9:50 pm
Iceman08
Member Since: 22 Sep 2014
Location: Hereford
Posts: 2284
My bad.......I didn't know this section existed
Thank you
19th Apr 2017 9:52 pm
Martin Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18558
You had long enough to find it 06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
19th Apr 2017 9:53 pm
Iceman08
Member Since: 22 Sep 2014
Location: Hereford
Posts: 2284
19th Apr 2017 9:55 pm
Iceman08
Member Since: 22 Sep 2014
Location: Hereford
Posts: 2284
I spoke with the most miserable woman ever today at Mantec! She will look into trying to get a better price but I'm not holding my breath, I'll be amazed if I even get a email from them!
20th Apr 2017 6:12 pm
garfield2
Member Since: 24 Jul 2008
Location: morley, leeds
Posts: 315
Looking at the link, it would appear that pre MY10 will need two additional parts which will alter the overall price.
Does anybody know someone who could fit one of these ? Its not a job I would want to tackle The happiest of people don't necessarily have the best of everything;
They just make the best of everything they have.
20th Apr 2017 7:00 pm
Iceman08
Member Since: 22 Sep 2014
Location: Hereford
Posts: 2284
C'mon Mark, it looks childs play to fit
My understanding is that the D4 3.0 needs additional parts and not the D3 2.7. I'm happy to be corrected though!
Tell you what Ben I will fit yours first then I will do mine The happiest of people don't necessarily have the best of everything;
They just make the best of everything they have.
20th Apr 2017 7:13 pm
Iceman08
Member Since: 22 Sep 2014
Location: Hereford
Posts: 2284
Or..........I'll fit mine and then watch you fit yours!!!
I'd happily fit it if we weren't so far apart.
20th Apr 2017 7:22 pm
Mogwyth
Member Since: 03 Oct 2014
Location: Pwllheli
Posts: 3976
Realy are simple to fit, if i remeber correctly, remove vent cover, drill two holes in the wing and fit riv-nuts, drill b pillar cover, fit riv-nut to existing hole in b pillar, refit cover, fit spacer, bolt RAI in place, fit top, job done.==================================
05 D3 HSE V8 4.4
04 MG TF 135
03 MG TF 115 Cool Blue Edition
02 MG TF 160
00 Hymer B564 Lionheart
1971 Series III 109
So I would not have to cut body around side vent ?The happiest of people don't necessarily have the best of everything;
They just make the best of everything they have.
20th Apr 2017 7:25 pm
Iceman08
Member Since: 22 Sep 2014
Location: Hereford
Posts: 2284
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
)
