KevUK
Member Since: 24 Mar 2015
Location: Cheltenham
Posts: 16
|
SRS Impact sensors procedure and IIDTool |
|
Hi
I need to remove the front impact sensors on my D4 to make some repairs to the body, just wondered if anyone knows what happens if you power up the car with these disconnected? I may well need to move the car around/keep the alarm powered etc before I replace the sensors and the workshop manual just gives the procedure for removing/replacing. I am planning to disconnect the battery, unplug and remove them but then reconnect the battery before I have replaced them
I assume the SRS system will just report an error if they are missing and not make an assumption that something is very wrong and deploy airbags!!
I did read a very useful post warning what happens if you leave the sensors plugged in but unscrewed from the chassis and then knock one of them..
I'm going to buy an IIDTool BT soon (after reading on this site about them) so will give DuckWorth parts a call as they are on this site, I need to replace my driver and passenger airbags and I see they have some kind of code on them, is that something that the IIDTool can program in to the car?
cheers
Kev
|
30th Mar 2017 11:21 pm |
|
|