NorthernDisco
Member Since: 01 Feb 2016
Location: North East
Posts: 65
  
|
I've recently purchased a Faultmate FCR after having some issues with the terrain control on my D3. I've cleared these faults and this is now working again but I've noticed it has quite a few other faults logged which some don't appear to be an issue but a couple of worrying ones have shown up.
This is the list I have so far so some enlightenment of what the all mean would be great:
BODY CONTROL
B1B02 - Low frequency coil signal failure
B1B70 - Local interconnection BUS circuit 2 failure
B1C57 - Passive start ignition relay coil circuit
B1D14 - Interior lamp 2 circuit failure (seems an obvious one to fix)
U0155 - Lost Comms with instrument cluster control module
HVAC
B1B78 - System pressure (I'm assuming this means I have a leak on my air con??)
Now the more worrying ones....
ENGINE MANAGEMENT
P140A - Exhaust gas receive sensor C circuit low
P029E - Cylinder 2 balance - fuel trim at max
P02AF - Cylinder 6 balance - fuel trim at min
Do these last 2 mean I have a couple of faulty injectors? and can the EGR one be fixed with an EGR blanking kit?
Any elaboration on any of the codes will be helpful.
Thanks
|
 19th Mar 2017 11:34 am |
|
|
