N19
Member Since: 26 Feb 2017
Location: Suffolk
Posts: 1
|
Hi All new to forum and Land Rovers
(Range Rover Sport 2.7 06) also maintain 09 Disco and LR series 2 on top of a Disco chassis
EPB fault, flashing red all the time, so the fuse is out at the mo, It's an auto so park is used.
Well worth the money,
Using iCarsoft LR-11 reader I have 2 codes for the EPB
C1A55 Ignition Switch Input current
U2002 Switch general Electrical Failure,
Also used the unjam to see what happens and you can hear the EPB move, Also I have used the bible to set the hand brake up,
The doors do unlock when you remove the key
I have searched and read up on here and other forums where the issue can be, Could I have help with mainly, which of the wires between the switch and module can I bypass to test, Like make a temp supply out the passenger door to the NSR connectors, I have tried another switch but no difference, fuses have power, I have checked the wiring for breaks over the rear axle, I cant test for power cos I'm not sure which should have 12v, I've read about the new loom available is it only LR who can supply it. It's knowing how to fix and diagnose the problem is what I'm interested in. I could give it to LR to fix but where is the fun in that
Thank you for any help and this forum
Tom
|
 26th Feb 2017 2:16 pm |
|
|
