Member Since: 19 Jan 2011
Location: Co. Durham
Posts: 12319
IID Tool and MY2016
Does the IID tool work on a MY2016 D4? Just checking before I buy one as have been told the MY2016 CCF etc is different to the earlier models Cheers Ian
--------------------
Club N.E.R.D.S
Kielder 4x4 Safari
Discoless
30th Jan 2017 1:26 pm
philm
Member Since: 02 Oct 2016
Location: Manchester
Posts: 732
Mine works L633 Defender
Range Rover Velar-gone
Discovery 4 Landmark-gone
Gap IID Tool
30th Jan 2017 1:28 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 72787
Works on my folks' MY16.
30th Jan 2017 1:29 pm
Hairy Dan
Member Since: 19 Jan 2011
Location: Co. Durham
Posts: 12319
Brilliant thanks both Cheers Ian
--------------------
Club N.E.R.D.S
Kielder 4x4 Safari
Discoless
And mine, did check with Pat first before getting the licence changed as the Gap www at the time only went up to MY14 iirc.
30th Jan 2017 4:03 pm
Hairy Dan
Member Since: 19 Jan 2011
Location: Co. Durham
Posts: 12319
Hopefully remote FBH activation is covered under the HVAC-Ventilation setting I think I'll probably drop Pat a PM just to check first.Cheers Ian
--------------------
Club N.E.R.D.S
Kielder 4x4 Safari
Discoless
30th Jan 2017 4:12 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 72787
Can't remember where it is but that's what I activated, there's two bits that need done for it. Plus one touch superlocking and beep on lock/unlock.
30th Jan 2017 4:18 pm
philm
Member Since: 02 Oct 2016
Location: Manchester
Posts: 732
Hairy Dan wrote:
Hopefully remote FBH activation is covered under the HVAC-Ventilation setting I think I'll probably drop Pat a PM just to check first.
Activated my remote with it.L633 Defender
Range Rover Velar-gone
Discovery 4 Landmark-gone
Gap IID Tool
30th Jan 2017 4:23 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 72787
Crib sheet from Rob
robpenrose wrote:
Derek,
After our PMs this morning regarding why our (at least my) parking heat/timed climate wasn't working, I think I have found the reason.
After checking the correct CCF setting on my IID tool, one of the settings on mine was wrong.
I checked my settings against these here:
And after changing the incorrect setting, the manual heat (nav on only, engine off to warm the cabin) started working and the auto button started to pulse and the FBH fired up.
It was however very smokey and seemed to turn off after a couple of minutes. I'm not sure if it now has a fault, turned off as the door was open, or the cabin reached a certain temp, as it was reasonably warm in the sun!
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum