jk3528
Member Since: 23 Feb 2016
Location: stoke on trent
Posts: 96
![](templates/vbnew/images/spacer.gif)
![2006 LR3 TDV6 SE Auto Barolo Black 2006 LR3 TDV6 SE Auto Barolo Black](../images/veh/barolo_black.gif)
|
so when you fit the oval timer and gsm switch
all you are doing is putting power to the fbh at pin 2 to make run????
so could you not just fit a switch ?
or am I missing something
|
1st Feb 2017 10:14 am |
|
|
Bodsy
Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
![](templates/vbnew/images/spacer.gif)
![2007 Discovery 3 TDV6 HSE Auto Java Black 2007 Discovery 3 TDV6 HSE Auto Java Black](../images/veh/java_black.gif)
|
No, you're not putting power to it, the timer is sending a command signal usingW-bus protocol.
If it was as easy as fitting 12v switch, there wouldn't be a need for proper controller units. Bodsys Brake Bible
D4/D3 Remote FBH heat kits
BAS Remaps/ EGR Blank
Transmission Flush
Software updates/enabling
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset
See It Here
|
1st Feb 2017 10:19 am |
|
|
jk3528
Member Since: 23 Feb 2016
Location: stoke on trent
Posts: 96
![](templates/vbnew/images/spacer.gif)
![2006 LR3 TDV6 SE Auto Barolo Black 2006 LR3 TDV6 SE Auto Barolo Black](../images/veh/barolo_black.gif)
|
so the oval timer has 4 wires
+ve feed in
-ve to earth
one to the fbh pin 2
wheres the other one go?
|
1st Feb 2017 10:28 am |
|
|
|
jk3528
Member Since: 23 Feb 2016
Location: stoke on trent
Posts: 96
![](templates/vbnew/images/spacer.gif)
![2006 LR3 TDV6 SE Auto Barolo Black 2006 LR3 TDV6 SE Auto Barolo Black](../images/veh/barolo_black.gif)
|
cheers
|
1st Feb 2017 10:39 am |
|
|