Member Since: 31 Mar 2016
Location: Gateshead
Posts: 234
2015 - Apart from the lack of air vent behind the NSF wheel?
2nd Dec 2016 11:19 am
Gazellio
Member Since: 09 Jan 2011
Location: Chilterns
Posts: 4130
^???
2nd Dec 2016 11:35 am
blue meanie D3 Decade
Member Since: 04 Aug 2005
Location: Newbury
Posts: 6861
mine was behaving in a similar way a few winters ago Gary, using the Webasto software + the OBD lead Martin has suggested and doing a few purge & burn type operations fixed it.
So glad I first bought a second hand FBH which I rebuilt with a new burner and glowplug..
... which is still in the shed 3 years later; beforehand and theeeeennn......???
2nd Dec 2016 1:36 pm
Snowman
Member Since: 06 Aug 2016
Location: Holmfirth
Posts: 317
Going to pop the fuse out this morning ,
In answer to an earlier question. My FBH does sweet FA, as far as I can tell it doesn't even try to fire up.Andy.
Series 3 SWB Wagon OEC614Y sold
Discovery 1 50th Anniversary Edition S882 BMA sold
Freelander TD4 ES Y615 YEC sold
Freelander TD4 Kalahari NX53 EVH sold
D2 TD5 XS 2003 YF03 WVW sold
D3 TDV6 2008 SE
3rd Dec 2016 9:22 am
riverblanche
Member Since: 31 Aug 2010
Location: retford'ish
Posts: 2210
Hi Gary,
at the time the burner starts to fire full power (after the fan has been running) try a gentle blow down the inlet or a wiff of "life support" if that gets the burner to get past the initial start up, then let it run its full time and see if that helps
Mine improved after a few good long burns but was still a bit hit or miss
Member Since: 06 Aug 2016
Location: Holmfirth
Posts: 317
Mine now working...result.Andy.
Series 3 SWB Wagon OEC614Y sold
Discovery 1 50th Anniversary Edition S882 BMA sold
Freelander TD4 ES Y615 YEC sold
Freelander TD4 Kalahari NX53 EVH sold
D2 TD5 XS 2003 YF03 WVW sold
D3 TDV6 2008 SE
3rd Dec 2016 8:44 pm
markagj
Member Since: 03 Dec 2015
Location: Wrexham
Posts: 175
The suspense is killing me! are you going to explain how? Discovery 4 HSE SDV6
Land Rover series 3 2.5 Petrol
3rd Dec 2016 9:11 pm
Snowman
Member Since: 06 Aug 2016
Location: Holmfirth
Posts: 317
Checked the fuel level and pulled out fuse 28, job Jobbed.
Went to it this morning to sort but my good lady had left it on empty, so put 3/4 tank in and pulled the fuse, came back from a trip out this evening and the top of the FBH was warm so it think all is now ok.Andy.
Series 3 SWB Wagon OEC614Y sold
Discovery 1 50th Anniversary Edition S882 BMA sold
Freelander TD4 ES Y615 YEC sold
Freelander TD4 Kalahari NX53 EVH sold
D2 TD5 XS 2003 YF03 WVW sold
D3 TDV6 2008 SE
3rd Dec 2016 9:26 pm
markagj
Member Since: 03 Dec 2015
Location: Wrexham
Posts: 175
I took mine off to clean it internally and thought I'd cracked it after a short run, because I felt some heat in it...but it seemingly turned out to be residual heat off the engine/hot coolant running close bye....as after further investigation it appears to be as dead as a dead thing! I need to get my Nanocom switched over to this car to diagnose further.
I hope yours turns out to working correctly Discovery 4 HSE SDV6
Land Rover series 3 2.5 Petrol
3rd Dec 2016 9:43 pm
Snowman
Member Since: 06 Aug 2016
Location: Holmfirth
Posts: 317
Mark, how are you enjoying the D3 after the D2, I recognized your user name from d2bc.
I have had to change mine as somebody already has Snowy on here.
I can't believe that I stuck with the D2 for so long, loving the D3. Andy.
Series 3 SWB Wagon OEC614Y sold
Discovery 1 50th Anniversary Edition S882 BMA sold
Freelander TD4 ES Y615 YEC sold
Freelander TD4 Kalahari NX53 EVH sold
D2 TD5 XS 2003 YF03 WVW sold
D3 TDV6 2008 SE
3rd Dec 2016 9:52 pm
markagj
Member Since: 03 Dec 2015
Location: Wrexham
Posts: 175
Hi Snowy,
I adored my D2 and it carried me and my family faultlessly, apart from what would be considered serviceable items for 40000 miles and still had loads of life left in it when I sold it.....but the D3, in my opinion, is in a different league altogether in many ways.....I just hope it proves to be as reliable long term.
Hope you're enjoying yours in similar way Discovery 4 HSE SDV6
Land Rover series 3 2.5 Petrol
3rd Dec 2016 10:11 pm
Snowman
Member Since: 06 Aug 2016
Location: Holmfirth
Posts: 317
Back to square 1, the heat I had felt was residual engine heat and not from FBH.
Do I need to get plugged in to clear the fault and reset.
If so can somebody local please help..Andy.
Series 3 SWB Wagon OEC614Y sold
Discovery 1 50th Anniversary Edition S882 BMA sold
Freelander TD4 ES Y615 YEC sold
Freelander TD4 Kalahari NX53 EVH sold
D2 TD5 XS 2003 YF03 WVW sold
D3 TDV6 2008 SE
5th Dec 2016 10:02 am
Gazellio
Member Since: 09 Jan 2011
Location: Chilterns
Posts: 4130
Pulling fuse 28 did not clear the "lockout" fault on mine. I had to use Hawkeye to clear the code then it fired up.
5th Dec 2016 10:30 am
Snowman
Member Since: 06 Aug 2016
Location: Holmfirth
Posts: 317
Thanks Gary.
Anyone near Huddersfield with a Hawkeye or similar who you unlock the FBH for me.
Thanks.Andy.
Series 3 SWB Wagon OEC614Y sold
Discovery 1 50th Anniversary Edition S882 BMA sold
Freelander TD4 ES Y615 YEC sold
Freelander TD4 Kalahari NX53 EVH sold
D2 TD5 XS 2003 YF03 WVW sold
D3 TDV6 2008 SE
5th Dec 2016 2:43 pm
Martin Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18452
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
