Saj2421
Member Since: 21 Jul 2011
Location: Wetherby
Posts: 32
|
To change te rear indicator bulbs do you access the lamps from behind the plastic pull down flap in the boot.
Thanks in advance 
|
 18th Jul 2012 8:52 am |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
  
|
No ... You have to remove the whole rear light ... Just 2 screws G4 Gone ...but not forgotten
|
| 18th Jul 2012 8:59 am |
|
|
SADISCOBOB
Member Since: 08 Oct 2010
Location: Alberton
Posts: 246
  
|
I had same query until it hit me like a stone ! You open tailgate, say it is RH indicator - look in " water groove" down RH side of door body frame - you will see two screws, one at top and one at bottom ( in the groove ). - Undo these and then grab whole rear light and wiggle and pull as there are two pins held in two rubber mounts which need some force to dissengage. If, like me it didn't move, try LH side, when that comes off you'll then see how-to for RH side.  Life always good with a Landy
2006 LR DISCO 3 4.4 V8 HSE
DISCO 1 2.8 TDi
DISCO11 TD5
RR CLASSIC 1980 3.5 V8
|
| 18th Jul 2012 1:34 pm |
|
|
NickJ
Member Since: 11 Oct 2010
Location: there's no f in point
Posts: 2137
|
The only thing I'd add to SADISCOBOB's explanation, just for clarification if you havent removed one before, is if you're standing looking straight at the rear of the car, pull the light unit directly towards you. Or... think of it as the car is going forwards but the light unit is remaining stationary and isn't moving.
|
| 18th Jul 2012 6:22 pm |
|
|
Henry08Disco
Member Since: 10 Jul 2011
Location: Canterbury
Posts: 12
|
Hi when I did mine, I found it difficult to get the cluster out the car, so used a wooden spatula to prise is out. Saved the paint work! Henry 08 Disco 3
|
| 18th Jul 2012 7:25 pm |
|
|
