Member Since: 10 Oct 2010
Location: Wolverhampton
Posts: 2
3rd row seats/ plastic arm that retracts seat belt buckle
I have stupidly broken the plastic arm that pulls the seat belt buckle down with the seat when you lower into the floor. Local landrover dealer has quoted £150 labour, saying that the only way to fit a new one is to remove the seat etc/etc - has anybody come across this and is there a way of fitting with seat in place. Thanks
10th Oct 2010 5:39 pm
top-tech
Member Since: 05 Aug 2010
Location: hertfordshire
Posts: 31
hi there, yes you can replace this plastic arm with the seat in situ,but it is fiddly!!!!! have a go but dont break the new one as from memory the part is expensive for a piece of plastic!!!!
10th Oct 2010 10:19 pm
NDM61
Member Since: 10 Oct 2010
Location: Wolverhampton
Posts: 2
Thanks top-tech. The price of this item is £50.00 - I thought that they had got the . in the wrong place!! Sounds as though you have actually replaced one of these arms. Can you give me some tips. The one end of the arm needs to go onto a metal lug -it wont go on as I have tried but obviously don't want to break the part - does it have to be 'forced' on? Is there anything that has to be taken apart to fit the arm?
11th Oct 2010 12:38 pm
Leo Disco
Member Since: 22 Dec 2013
Location: Newcastle
Posts: 210
Hi
Noticed mine was broken the other day. Seat belt not going down with seat. Took the two parts out, braced the snapped plastic with a piece of plastic from a plastic box. Drilled 2mm holes through both parts and bolted them together. Added some 5min 2 pack glue for good measure. Managed to fit it back on with one seat down. Job done, no real cost just about an hours work.
Rich
3rd Feb 2014 10:11 pm
tj2k
Member Since: 20 Nov 2012
Location: Cheshire
Posts: 79
Does anyone have the part number for this offending part? I have the same issue with my drivers-side 3rd row seat
_______________________
2019 L462 HSE Lux
7th Nov 2016 6:37 pm
BBDisco3
Member Since: 23 Nov 2008
Location: Cheshire
Posts: 3646
I had one fail and replaced under warranty.
The technician printed off a plan of the seat assembly then we went back to the car and compared each part until the broken one was identified.
7th Nov 2016 7:17 pm
dgardel
Member Since: 03 Nov 2009
Location: Greater Venice
Posts: 2025
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
