DISCO3.CO.UK - View topic - Keeping the suspension "UP".

GraemeS

Member Since: 17 Mar 2008
Location: NSW
Posts: 706

2010 Discovery 4 3.0 TDV6 SE Auto Nara Bronze

Have you paid for one yet or still waiting to order? I spoke with BD last Friday looking for feed-back and he was going to ring me back this week, so that should have prompted him to chase-up any outstanding inquiries. He didn't ring back but I didn't chase him as I decided to order another 100 sets of looms regardless.

Do you have a deadline? Home of LLAMS, for LRs and Jeep GCs

22nd Oct 2010 11:59 am

StornowaySA

Member Since: 23 Sep 2007
Location: Adelaide
Posts: 406

2010 Discovery 4 3.0 TDV6 HSE Auto Stornoway Grey

He has all my details - incl ccard; I guess he'll call Monday MY2010 D4 HSE 3.0, e-diff, 19inch MTR's; LLAMS Height adjustor, LR f & r light guards, LR side steps, LR bright finish side door mouldings; LR/Mantec G4 front bash plate, LR G4 Winch kit, Warn 9500lb Winch; GOE compressor guard, Uniden UHF, LR bright finish roof rails, LR G4 driving light kit, LR G4 ladder, 4 x extra rear compartment 12V sockets, Traxide dual battery system and Optima Yellowtop battery, ORS drawer system / fridge slide, LED rear compartment lighting.

22nd Oct 2010 12:15 pm

GraemeS

Member Since: 17 Mar 2008
Location: NSW
Posts: 706

Hi StornawaySA,
BD sent a kit on Friday to someone but as I couldn't give BD your name, he was unable to confirm it was for you. He's going to recheck his list to see if anyone has been missed.

Still a very slow uptake but this lot have to last until I get the next batch ready which probably wont be until early next year. Home of LLAMS, for LRs and Jeep GCs

25th Oct 2010 3:50 am

StornowaySA

Member Since: 23 Sep 2007
Location: Adelaide
Posts: 406

Hmm, well he still hasnt responded to my emails.... MY2010 D4 HSE 3.0, e-diff, 19inch MTR's; LLAMS Height adjustor, LR f & r light guards, LR side steps, LR bright finish side door mouldings; LR/Mantec G4 front bash plate, LR G4 Winch kit, Warn 9500lb Winch; GOE compressor guard, Uniden UHF, LR bright finish roof rails, LR G4 driving light kit, LR G4 ladder, 4 x extra rear compartment 12V sockets, Traxide dual battery system and Optima Yellowtop battery, ORS drawer system / fridge slide, LED rear compartment lighting.

25th Oct 2010 7:39 am

GraemeS

Member Since: 17 Mar 2008
Location: NSW
Posts: 706

I've not had a lot of success with e-mailing Bruce. I don't know if he gets a lot of spam from his web-site or just doesn't look at emails, but a phone call may be required even though it shouldn't be. Home of LLAMS, for LRs and Jeep GCs

25th Oct 2010 10:04 pm

lrdef110

Member Since: 21 Jun 2006
Location: Mackay
Posts: 50

2011 Discovery 4 3.0 TDV6 SE Auto Unknown Colour

Hi Graeme, got mine last week from BD but had to follow up emails with a couple of phone calls. Not sure he checks emails very often.

I have a couple of questions though about the set up (have not fiited yet as only arrived home today with a new D4 3.0 litre. Would it be possible for you to PM a contact no for you and I will give you a call.

(PS the kit looks really well done.)

Cheers

26th Oct 2010 8:25 am

~Rich~

Member Since: 16 Mar 2009
Location: Sydney
Posts: 628

2014 Discovery 4 3.0 SDV6 HSE Auto Fuji White

lrdef110 wrote:
Hi Graeme, got mine last week from BD but had to follow up emails with a couple of phone calls. Not sure he checks emails very often.

I have a couple of questions though about the set up (have not fiited yet as only arrived home today with a new D4 3.0 litre. Would it be possible for you to PM a contact no for you and I will give you a call.

(PS the kit looks really well done.)

Cheers

Did you have a look at these PDF files:

Loom & Calbration:

http://www.box.net/shared/nxtbf4yd4p

D3 Switch Installation:

http://www.box.net/shared/y90mhxmire

Should help fill in the gaps.

2014 SDV6 HSE White, LLAMS Height Controller, Tinted Glass, Tuff Ant Sliders and 18" steel wheels, Safari Snorkel, Rhino Rack Platform, ARB Air Compressor, Custom Drawer and storage unit -http://www.box.com/s/jem0ilac3cner2mexq64 UHF CB, 4x4 Intellegence RWC, 120ltr Long range tank, Rock Sliders and Compressor protection plate Beanie grill, De Tango.

26th Oct 2010 8:45 am

StornowaySA

Member Since: 23 Sep 2007
Location: Adelaide
Posts: 406

I'll call him 2moro!

MY2010 D4 HSE 3.0, e-diff, 19inch MTR's; LLAMS Height adjustor, LR f & r light guards, LR side steps, LR bright finish side door mouldings; LR/Mantec G4 front bash plate, LR G4 Winch kit, Warn 9500lb Winch; GOE compressor guard, Uniden UHF, LR bright finish roof rails, LR G4 driving light kit, LR G4 ladder, 4 x extra rear compartment 12V sockets, Traxide dual battery system and Optima Yellowtop battery, ORS drawer system / fridge slide, LED rear compartment lighting.

26th Oct 2010 9:16 am

lrdef110

Member Since: 21 Jun 2006
Location: Mackay
Posts: 50

Stornaway its not a question about fitting (as I am aware of Rich's good work) but more to understand how it works.

Cheers

26th Oct 2010 9:26 am

StornowaySA

Member Since: 23 Sep 2007
Location: Adelaide
Posts: 406

...ummm...mix up on the thread...I will call BD tomorrow to see where mine is at - he may have lost my order.

MY2010 D4 HSE 3.0, e-diff, 19inch MTR's; LLAMS Height adjustor, LR f & r light guards, LR side steps, LR bright finish side door mouldings; LR/Mantec G4 front bash plate, LR G4 Winch kit, Warn 9500lb Winch; GOE compressor guard, Uniden UHF, LR bright finish roof rails, LR G4 driving light kit, LR G4 ladder, 4 x extra rear compartment 12V sockets, Traxide dual battery system and Optima Yellowtop battery, ORS drawer system / fridge slide, LED rear compartment lighting.

26th Oct 2010 9:54 am

GraemeS

Member Since: 17 Mar 2008
Location: NSW
Posts: 706

lrdef110 wrote:
I have a couple of questions though about the set up (have not fiited yet as only arrived home today with a new D4 3.0 litre. Would it be possible for you to PM a contact no for you and I will give you a call.

Most certainly!

Thanks for the good comments too. Home of LLAMS, for LRs and Jeep GCs

26th Oct 2010 10:45 am

GraemeS

Member Since: 17 Mar 2008
Location: NSW
Posts: 706

It seems that I messed-up the packaging of a kit and omitted the switch lead. My apologies to the purchaser from Qld. Home of LLAMS, for LRs and Jeep GCs

28th Oct 2010 6:20 am

StornowaySA

Member Since: 23 Sep 2007
Location: Adelaide
Posts: 406

Graeme, mine was mailed today

MY2010 D4 HSE 3.0, e-diff, 19inch MTR's; LLAMS Height adjustor, LR f & r light guards, LR side steps, LR bright finish side door mouldings; LR/Mantec G4 front bash plate, LR G4 Winch kit, Warn 9500lb Winch; GOE compressor guard, Uniden UHF, LR bright finish roof rails, LR G4 driving light kit, LR G4 ladder, 4 x extra rear compartment 12V sockets, Traxide dual battery system and Optima Yellowtop battery, ORS drawer system / fridge slide, LED rear compartment lighting.

28th Oct 2010 8:48 am

GraemeS

Member Since: 17 Mar 2008
Location: NSW
Posts: 706

Good to hear, StornawaySA.

I can supply outside Oz directly if desired. Home of LLAMS, for LRs and Jeep GCs

31st Oct 2010 8:14 pm

seanc

Member Since: 17 Oct 2010
Location: Townsville
Posts: 4

GraemeS wrote:
It seems that I messed-up the packaging of a kit and omitted the switch lead. My apologies to the purchaser from Qld.

Greame,
That was me that had the missing switch. Small drama with the switch being sent by courier when that company lost track of it and it arrived at their local depot where I picked it up 3 minutes before they closed for the weekend on Friday. No weekend deliveries!! I was off on holidays on Saturday and fitted the kit that morning. Switch is not properly mounted yet but hanging out of panel under steering wheel.
It was well worth the drama and am very pleased with the way it operates. We travelled from Townsville out west through Barcaldine to Thargomindah. The road from Thargominadah to Tibooburra was only just open after unseasonal rain. There was a creek with 800mm of flowing water that we went through with the D4 at offroad height and the llams height control at +50mm. Went through effortlessly. I would not have attempted this without the additional height due to the fact the water was flowing too fast for a lower vehicle. The deep ruts and sand on this ~250 km of dirt road after recent rains was done effortless using the +50mm at speeds of 70 - 80kmh at times.
All the stress of whether the full kit would arrive on time before we left had disappered. Thanks for going the extra effort to get the lead to me just in time. Appreciated.
sean

4th Nov 2010 1:05 am