Good question. I was planning to replace the 55w bulbs with 100w bulbs but I hadn't got as far as doing the maths yet...
Lets see, 200W, 12V, that's about 17A isn't it Means the fuse would need to be changed.
Question is - does anyone know if the LR wiring and relay would be up to this
5th Oct 2007 10:14 pm
TazDaz
Member Since: 07 May 2007
Location: South East Essex
Posts: 2858
BCB yes 17A is right on the maths
I had mine excellently wired by a well known member of this forum I hope he allowed for that current draw on the cabling... not sure what rating the relay was either
5th Oct 2007 10:23 pm
10forcash
Member Since: 09 Jun 2005
Location: Ubique
Posts: 16534
The LR wiring is rated at 20A with a 30A relay so a fuse change to 20A (although you should really be doing the calcs at 14V) will be OK
TazDaz, your wiring is rated at 25A with a 30A relay
Member Since: 11 Jan 2005
Location: Shropshire
Posts: 18296
DG
Those are on a Jeep... does that mean they are the real thing too ?
5th Oct 2007 10:50 pm
10forcash
Member Since: 09 Jun 2005
Location: Ubique
Posts: 16534
bobbycrispbox wrote:
I was thinking about my nudgebar mounted lights as opposed to the ones on the roof
260W @14V is only 18.6A you should be OK
5th Oct 2007 10:52 pm
DG Site Moderator
Member Since: 12 Dec 2005
Location: The Gaff
Posts: 50977
The Lightforce does not hold such prejudice like your good-self Mr. 21 year LR veteran > D2 GS 2003 > D3 S 2006 > D3 HSE 2009 > D4 HSE 2013 > D4 HSE 2015 > D5 HSE 2018 > DS HSE R-Dynamic P300e 2021
5th Oct 2007 10:52 pm
simon
Member Since: 11 Jan 2005
Location: Shropshire
Posts: 18296
Prejudice no...
I quite like the new 4 door Mangler
Last edited by simon on 5th Oct 2007 11:01 pm. Edited 1 time in total
5th Oct 2007 10:54 pm
10forcash
Member Since: 09 Jun 2005
Location: Ubique
Posts: 16534
TazDaz - can't remember TBH, either H1 or H3 - this will be marked on the lamp (bulb) itself along with the wattage.... screwdriver time I think
5th Oct 2007 10:58 pm
TazDaz
Member Since: 07 May 2007
Location: South East Essex
Posts: 2858
10forcash wrote:
TazDaz - can't remember TBH, either H1 or H3 - this will be marked on the lamp (bulb) itself along with the wattage.... screwdriver time I think
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum