I have been out running a cable for a reverse cam so had the batter disconnected for a while. Reconnected and tried to lock the car but nothing. None of the key functions work but the car will recognise it and start. Any one seen this before and have a fix?
Thanks
13th Mar 2016 4:51 pm
tayaste
Member Since: 15 May 2013
Location: Chester
Posts: 7633
Where / how did you run the cable ?
Along the passenger side below the floor trim by any chance ?
Ah crap. Where am I looking? Front, rear or just anywhere along the loom?? I had the drivers and passenger side b pillar upper trim off too, didn't notice anything behind that though so assume floor level is the issue?
See your link now. Cheers.
13th Mar 2016 5:13 pm
tayaste
Member Since: 15 May 2013
Location: Chester
Posts: 7633
Went back out the car last night and the key fob worked straight away. Was a bit tight for time so didn't investigate the splice but will re-make it in the near future to avoid a repeat. Thanks for the help tayaste - much appreciated.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
