Member Since: 19 Oct 2015
Location: Southampton
Posts: 143
AUTO DIPPING MIRROR
Ok, another day and another question.
My D3 has an annoying habit of when you select reverse gear the mirrors dip... Brilliant, but what isn't so good is that the passenger side doesn't always return back to its preset positron.. It does sometimes but most of the time it doesn't it only moves about half way back.
I had a P38 Range Rover years ago and that had the same issue.
Is this a common problem and of so is there a trick to solve it.
I've tried adjusting the mirror and setting the seat memory quite a few times
Many thanks
Tony
2nd Jan 2016 11:39 pm
tayaste
Member Since: 15 May 2013
Location: Chester
Posts: 7633
You can turn it off in the settings
2nd Jan 2016 11:41 pm
Mogwyth
Member Since: 03 Oct 2014
Location: Pwllheli
Posts: 3976
Mine does this occasionally, if I press my seat present button they return to normal position.==================================
05 D3 HSE V8 4.4
04 MG TF 135
03 MG TF 115 Cool Blue Edition
02 MG TF 160
00 Hymer B564 Lionheart
1971 Series III 109
2nd Jan 2016 11:42 pm
D16PJM
Member Since: 08 Dec 2015
Location: Sidcup, Kent
Posts: 309
press and hold then "I" on left stalk, scroll through and turn it off, first thing I did to mine was driving me nuts.
3rd Jan 2016 12:29 am
les-goose
Member Since: 24 Nov 2015
Location: YORKSHIRE
Posts: 77
When activated the thing drives you nuts
3rd Jan 2016 12:54 am
Discoveringcomfort
Member Since: 16 Sep 2015
Location: Berkshire
Posts: 637
I have had other cars with dipping mirrors but this one is mad, the lhs dips fine but the drivers side dips and keeps on going twice as far! All I can see is the drivers door handle and below, I can't see any cars next to me or behind.
Can the amount of dip be changed?
MarcSeries 1 V8
Series 2 Hibrid V8
Discovery 3 HSE V8
5th Jan 2016 2:01 am
armalites
Member Since: 17 Aug 2013
Location: Herefordshire
Posts: 1918
From the owners manual
Windows and mirrors
R
Electric operation
With the rotary knob in
the central position,
push the knob downwards to fold the mirrors.
Push the knob downwards again to unfold the
mirrors.
If the mirrors are accide
ntally knocked out of
position (i.e. with one mirror folded and the
other in the normal pos
ition), an additional
operation of the switch will re-synchronise
them.
Reverse mirror dipping
Vehicles with driver’s seat memory have a
function which dips the exterior mirrors
whenever reverse gear is selected, giving the
driver a view of the kerb.
When this feature is first used, the mirrors will
dip to a preset position.
The degree of dipping
can be programmed using the following
sequence:
1.
Turn the starter key to position
I
or
II
. Do
not start the engine.
2.
Select or store a driver’s seat memory
position. See
MEMORY FUNCTION
(page 138).
3.
Select reverse gear, the exterior mirrors
will adjust to a preset position.
4.
Adjust the mirrors to the required dipped
position.
5.
Perform a memory store procedure on the
currently selected driving seat position.
6. DOOR MIRROR DIP STORED
will be
displayed on the message centre
accompanied by a single chime.
This feature can be enab
led or disabled. See
TRIP COMPUTER
(page 11IID PRO
MSV Extreme
Nanocom One
5th Jan 2016 2:16 am
Discoveringcomfort
Member Since: 16 Sep 2015
Location: Berkshire
Posts: 637
Brill thanks!
Bizzarely my mirrors have changed, without doing anything they now dip half as much and then move outwards. All that has changed is I have gained a et drivers carpet from a leak somwhere to be investigated.
MarcSeries 1 V8
Series 2 Hibrid V8
Discovery 3 HSE V8
6th Jan 2016 12:01 am
Discoveringcomfort
Member Since: 16 Sep 2015
Location: Berkshire
Posts: 637
Fixed the dip level but it did not stop me from reversing in to a tiny car!
My nearside mirror is fully inwards but still I cannot see the side of my car body so it is facing the pavement!
MarcSeries 1 V8
Series 2 Hibrid V8
Discovery 3 HSE V8
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum